P2k Tools motorola v220 &unlocking

ok i have a v220 and i tried to use that Motorola Unlocker and i followed all the steps and it saying "RFone not found". I've done a lil reading and i think i also need that p2k toools right? It also saying on my cell "battery low cannot program". and heres some of the info on the screen...Boot Loader 07.B0 SW Version:R365_G_0B.D2.2 ER(whateva that means). Also do i need to have the charger plugged into it while im doing it? and where can i get P2k Tools?, i cant find it anywhere. thanks in advance from a novice newbie.

 

Keeping reading the threads.

You need flash R364 to get the unlocker to work.

I can tell you the specifics if you like or you can read the thread that Titonel and Mossy had going in February for a step by step.

PS
You need the P2K driver for a USB cable.
You need Motorola PST software to revert your phone to 364 flash.

Not reading the thread will cost you many hours.

Good Luck

 

sworton:

It seems that you need some more knowlage on mot phones...

theind:

Ask yourself.....

 

BoBa,

thanks for your reply. I have an XT box for my kids which aren't interner connected but i'll put the files on a cd and try it.

Im guessing I need the charger based on your other email.

I thank you for your help and kindness

 

@sworton:

?????????

 

BoBa,

I meant i'll try this on an XP. I plan on using pst 6.9.2 with 6.7 patch.

I also meant i'll have the power cord connected while I do this.

Sorry for the confusion.

 

You have an option to charge battery in other phone...

 

thx

already switched batteries too.

moving to xp per your advice.

 

hey

dus any1 own a R364_G_0B.D1.32R_PDS003_LP0003_DRM0001_JPJAVA_G_0B_V220_01_03_63R_GSIV220CIN03NA103_1FF flash file they can send me


plz cos i av been tryin to unlock my v220 all day


thanks

 

i finally unl;ocked my phone

thanks boba

I needed to use XP

 

hey i been trying to unlock my motorola v220 phone so i can used my t-mobile sim on there but i cant seem to get how to do it, can anyone please give me a step by step instructions on how to do it....


thx

 

You also need an interface cable if u dont have one no matter what!!! Radio shack can help u out with that.

if you boot ur phone and its flash version R364. You just need to run motorola unlocker which u can find on the web.

to boot ur phone turn it off - then press * # and power together for five seconds.

Look at ur flash version. if its R364 then just run the unlocker.

if its not you have to downgrade it to R364 by getting the stuff below.

you need motorola multi flash flex which is part of the Motorola PST software.

SO look for PST 6.9.2 first and then pst 6.7 second out on the web. Youll also need the p2k driver set.

Load 6.9.2 first. Then overwrite all files it finds with 6.7

run the multiflash flex with ur phone booted.

connect the cable.

if u get this far.. write again and i'll finish this for u .