Philips LCD 32" and TV-out *problems* via DVI-HDMI

Discussion in 'Home Theater PC' started by VVV84, Sep 14, 2006.

  1. VVV84

    VVV84 Member

    Joined:
    Sep 2, 2006
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    So. My problem is that i can't seem to get a signal from my graphics card to my TV. I'm currently trying to use a DVI-cable from my GF FX5200, by using a DVI->HDMI adapter on the TVs end. The computer doesn't even seem to recognize the TV and the result is always the same: TV shows "No input signal". I've been able to force the TV recognition successfully a few times, but still can't get the picture to show... At all.

    The TV does support PC-connection. The manual gives the resolutions and etc. so I just don't understand what the problem is!

    Broken cable? Broken DVI-connector? Broken adapter? Should I waste some 85€s to try a straight HDMI->DVI-cable (nice prices in Finland as you can see)?
     
  2. marsey99

    marsey99 Regular member

    Joined:
    Aug 13, 2006
    Messages:
    1,398
    Likes Received:
    0
    Trophy Points:
    46
    have you tried any other source? my stepdads best mate had a philips lcd and that wouldnt recieve sound through hdmi and they said it was a dodgy batch of sockets on the back of that set.
    85 euros you can pay that in the uk for a normal dvi lead twice that for a hdmi
     
  3. VVV84

    VVV84 Member

    Joined:
    Sep 2, 2006
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    I haven't got any other DVI or HDMI devices to test with. The tv has 2 HDMI-connectors and I've tested it on both of them with no positive results. I'm currently considering to stop trying and buy a component cable and a DVI-adapter for it if the problem won't be solved soon. I'm getting really frustrated with this situation.

    Other option would be using svideo, but I WANT a clear picture. If I've understood correctly the component-cable should give a picture quality close to that of the DVI/HDMI... But I'd really hate to waste more money on it that i already have with those DVI-HDMI-cables and adapters.
     
  4. marsey99

    marsey99 Regular member

    Joined:
    Aug 13, 2006
    Messages:
    1,398
    Likes Received:
    0
    Trophy Points:
    46
    have you got the latest driver from nvidia? that might help
     
  5. VVV84

    VVV84 Member

    Joined:
    Sep 2, 2006
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    Yep. Just upgraded after trying a few times with the older drivers...
     
  6. bajtra

    bajtra Member

    Joined:
    Feb 9, 2004
    Messages:
    72
    Likes Received:
    0
    Trophy Points:
    16
    This might be too basic, but have you made sure you're on the right input? My tv has 7 inputs and finding which is which can be confusing.

    Set the output to a low resolution like 1080*720, even if it can do higher.

    You can try the s-video just to see if you get a connection that way. If not then something's wrong.

    My guess would be to suspect the converter if the svideo works.

     
  7. VVV84

    VVV84 Member

    Joined:
    Sep 2, 2006
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    I'm using one of the two HDMIs which are both ok for PC-connection by the manual (and i've tried both). I've tried every resolution possible. I haven't tried, but I'm pretty sure the svideo would work just ok. But I'll try once I get back home on sunday.
     

Share This Page