pioneer 112d problems

Discussion in 'DVD / Blu-ray drives' started by devz2k, Dec 13, 2007.

  1. devz2k

    devz2k Guest

    i have a video_ts and a audio_ts folder.... i tried to burn them via nero 7 ultra and i got the following error

    Dev

    1C82-A0K5-19E5-MAAX-400E-6571-****

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.10.1.0
    Internal Version: 7, 10, 1, 0

    Recorder: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 1 ID 0 DMA: On
    DiskPeripheral : QUANTUM FIREBALLlct15 15 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-112D E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    BUFE : 0
    Physical memory : 383MB (392204kB)
    Free physical memory: 136MB (139504kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    13.12.2007
    Burn DVD Image
    21:36:11 #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    21:36:12 #2 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    21:36:18 #3 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 72929 ( 16:12.29, 142MB)

    21:36:18 #4 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    21:36:19 #5 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: PIONEER DVD-RW DVR-112D, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    21:36:19 #6 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD R DL.)

    21:36:19 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 72930 (72930) = #72930/16:12.30
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 72930 blocks [E: PIONEER DVD-RW DVR-112D]
    --------------------------------------------------------------

    21:36:19 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: PIONEER DVD-RW DVR-112D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 149360640, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 72930 | 72930 | 0x00
    72930 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    21:36:19 #9 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    21:36:19 #10 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    21:36:19 #11 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    21:36:19 #12 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    21:36:19 #13 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    21:36:19 #14 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    21:36:19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    21:36:19 #16 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    21:36:19 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x062afe40: Len x648

    21:36:19 #18 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:36:19 #19 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 57662400

    21:36:20 #20 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:20.609 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #21 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.828 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #22 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.859 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #23 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.890 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #24 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.906 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #25 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.906 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:32 #26 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:32.953 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #27 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.000 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #28 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.031 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #29 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.046 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #30 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.046 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #31 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.078 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #32 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.093 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #33 Text 0 File Cdrdrv.cpp, Line 1352
    21:36:33.093 - E: PIONEER DVD-RW DVR-112D : Queue again later

    21:36:33 #34 SPTI -1 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0xA8
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 06 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 04 93 00 00 0E 26 08 11 FE A8 03
    Buffer x07260c40: Len x10000
    0xFD FF FF 8D 4D B4 E8 22 44 00 00 84 C0 0F 84 77
    0xFD FF FF 8D 45 F4 50 8D 45 B4 50 8B CE E8 49 19
    0x00 00 84 C0 0F 84 60 FD FF FF 6A 01 FF 75 F4 8D

    21:36:33 #35 CDR -1 File Writer.cpp, Line 303
    Unspecified Recorder Error
    E: PIONEER DVD-RW DVR-112D

    21:36:35 #36 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 1536

    21:36:35 #37 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    21:36:35 #38 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    21:36:39 #39 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    21:36:39 #40 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ------------------------------------------------------------------
    i also tried to burn an xp image to a dvd with dvd decrypter and then i got the following error....

    I/O ERROR!

    DEVICE: [0:0:0] PIONEER DVD-RW DVR-112D 1.21 (e:) ATA

    SCSISTATUS 0x02
    interpretation: check condition

    cdb: 2A 00 00 00 00 00 00 00 20 00
    INTERPRETATION WRITE (10) - SECTORS: 0-31

    SENSE AREA: 70 00 05 04 93 00 00 0E 26 08 11 FE A8 03 00 00 00 00 00 00 00 00
    INTERPRETATION:UNKNOWN (0xA8, 0x03)
    -----------------------------------------------------------------

    please can someone help me in order to fix this problem... so far i have not burned any DVD's or CD's as it keeps comming up with an error.... i have tried many other dvd burners and have also tried different versions of nero
     
  2. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    629
    Likes Received:
    0
    Trophy Points:
    26
    You have little RAM so do not try and multitask while burning.

    There is an update for the writer.
    http://forum.rpc1.org/dl_firmware.php?download_id=2331

    If you are reusing the RW disc, do not use the quick erase on Nero.
    It does not do a good eouugh job.
     
    Last edited: Dec 15, 2007
  3. devz2k

    devz2k Guest

    its okay i figured out the problem ..... it was that i needed a new lead for the dvd writer and i used my old one and now it works fine..... thanks anyways
     

Share This Page