Please help

I use nero 7 to burn my movie, before I can preview the movie when they process , but yesterday after I DL zone alarm then when I burn my movie I unable to view any more , would some one tell how can fix that problem , I already reinstall nero 3 time. Thanks

 

Hello, everyone!

I also need HELP!

I am experiencing continious problems with Nero 7 when I try to burn DVD-Video. You won't believe the amount of time I spent on this website searching practically every thread that seemed relevant. I tried everything that was recommended - nothing really helped, not for a long while, anyway. I am sincerely hoping that someone can help me (I already know there are some GREAT experts and really helpful people here).

It's the dreaded "Power calibration error" message I keep getting. I used Memorex DVD-R before to burn my movies with NeroVision 4, and with the exception of few wasted disks, everything was all right. I started using CompUSA DVD+R disks and - out of 20 - I was only able to burn 3 disks.

I looked at all the threads about power calibration error, I've tried almost every solution - but nothing really helped. When I called FUJITSU, they recommended uninstallig the driver and restarting the computer - which I did, and it was fine for a little while. But it doesn't work anymore. I am SO desperate now! They also told me there was no firmware for this model.

Instead of burning my files to DVD, I started writing them to a folder on the hard drive, and it goes fine. But when I tried to use Nero Burning ROM to burn the movie on the disk (I also used Ashampoo Studio 6 for that) - same problem with power calibration error!

I would be eternaly grateful if someone can look at my latest report from Nero Burning ROM and advise how to resolve this problem.

My laptop is over 1 year old, it's FUJITSU notebook. My driver is MATSHITA DVD-RAM UJ-831S, and here's the report.

AG

1C83-[serial number removed]

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-831S>Version: 1.01 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA DVD-RAM UJ-831S >Version: 1.01 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-831S atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHT2080AT atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-831S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523696kB)
Free physical memory: 198MB (203156kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.1.2007
ISO compilation
4:38:27 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:38:27 AM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:38:27 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

4:38:27 AM #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

4:38:28 AM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1267119 (281:34.69, 2474MB)

4:38:28 AM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

4:38:28 AM #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: MATSHITA DVD-RAM UJ-831S, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

4:38:28 AM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:38:28 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1267120 (1267120) = #1267120/281:34.70
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1267120 blocks [D: MATSHITA DVD-RAM UJ-831S]
--------------------------------------------------------------

4:38:28 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: MATSHITA DVD-RAM UJ-831S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2595061760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1267120 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1267120 | 0 | 0x00
1267120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:38:28 AM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:38:28 AM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

4:38:28 AM #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

4:38:28 AM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

4:38:28 AM #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3,324 KB/s)

4:38:28 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:38:28 AM #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

4:38:28 AM #18 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: No

4:39:07 AM #19 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 00 00 00 0A 00 00 19 10 73 03
Buffer x09ad0640: Len x10000
0xB1 58 0A E0 50 02 00 73 DF 20 F0 27 05 C6 80 E2
0x86 C6 EE FD C8 29 7A 96 A9 54 8B CC 09 22 94 68
0xAA 4A A0 E7 B1 82 21 D1 46 AA C4 F8 38 46 9E 73

4:39:07 AM #20 CDR -1106 File Writer.cpp, Line 299
Power calibration error
D: MATSHITA DVD-RAM UJ-831S

4:39:07 AM #21 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 19 10 73 03

4:39:07 AM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 19 10 73 03

4:39:07 AM #23 CDR -1106 File WriterStatus.cpp, Line 162
Power calibration error
D: MATSHITA DVD-RAM UJ-831S

4:39:07 AM #24 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

4:39:08 AM #25 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3,324 KB/s)

4:39:08 AM #26 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:39:11 AM #27 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

4:39:11 AM #28 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.19, size=57344 bytes, created 4/14/2004 4:50:54 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 10/21/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


THANK YOU!