I keep getting this message and its driving me nuts. I have a gateway computer running windows xp pro, plextor 716a drive and dvd decrypter. I made sure the settings are all set at dma, turned off all of the norton utilities and spy sweepers. Made sure no other program is running. I am using verbatim dvd dl discs. I have wasted about 8 already trying to burn these discs. some burn and some wont. it is a k-drama series and I cant seem to burn #5 disc. This is one of the messages I keep getting. I/O Error! Device0:1:0) Plextor dvdr px-716a 1.09 (E (ATA) Scsi Status: 0X02 Interpretation : Check Condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10)-Sectors: 32-63 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00 Interpretation: Invalid Field in CDB It also says: I 19:28:07 DVD Decrypter Version 3.5.4.0 started! I 19:28:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) W 19:28:07 Drive J:\ (FAT32) does not support single files > 4 GB I 19:28:07 Initialising SPTI... I 19:28:07 Searching for SCSI / ATAPI devices... I 19:28:07 Found 2 DVD±RWs! I 19:30:09 Operation Started! I 19:30:09 Source File: J:\LOVEWINTER_5.MDS I 19:30:09 Source File Sectors: 3,184,686 (MODE1/2048) I 19:30:09 Source File Size: 6,522,236,928 bytes I 19:30:09 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 19:30:10 Destination Device: [0:1:0] PLEXTOR DVDR PX-716A 1.09 (E (ATA) I 19:30:10 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 19:30:10 Destination Media Sectors: 4,173,824 I 19:30:10 Write Mode: DVD I 19:30:10 Write Type: SAO I 19:30:10 Write Speed: 2.4x I 19:30:10 Link Size: Auto I 19:30:10 Test Mode: No I 19:30:10 BURN-Proof: Enabled I 19:30:10 Optimal L0 Data Zone Capacity: 1,668,656 I 19:30:10 Optimal L0 Data Zone Method: Copied From Original Disc I 19:30:10 Filling Buffer... I 19:30:11 Writing LeadIn... W 19:31:09 Failed to Write Sectors 32 - 63 - Invalid Field in CDB W 19:31:10 Retrying (1 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (2 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (3 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (4 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (5 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (6 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (7 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (8 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (9 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (10 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (11 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (12 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (13 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (14 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (15 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (16 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (17 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (18 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (19 of 20)... W 19:31:10 Retry Failed - Invalid Field in CDB W 19:31:10 Retrying (20 of 20)... W 19:31:10 Retry Failed! - Invalid Field in CDB E 19:39:19 Failed to Write Sectors 32 - 63 - Invalid Field in CDB I 19:39:19 Synchronising Cache... I 19:39:19 Closing Track... I 19:39:19 Finalising Disc... E 19:39:19 Failed to Write Image! E 19:39:19 Operation Failed! - Duration: 00:09:09 I 19:39:19 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 14 KB/s (0.0x) Plz Help me as I am at a Loss. Follow BBmayos guide for burning dual layer dvd's but still cant do it. Any help would be appreciated. Thanks in Advance
what I would do is to try to burn with IMGBurn instead of DVDDecrypter. it's more up to date and it's made by the same auther of DVDDecrypter which is not updated anymore. you can get this free program here: http://www.afterdawn.com/software/cdr_software/cdr_tools/imgburn.cfm if this is the case and it does burn to your DLs then ok..... but if it doesn't then it's DVDD not making the ISO correctly and could be the problem. And this is what I found out while I googled your problem [bold]Invalid field of CDB[/bold] hope this helps! also just noticed the DVDDecrypter error while you were writing the ISO file: it's telling you that at Sectors 32-63 there is something wrong and to [bold]check the condition[/bold] of the disk itself! try cleaning the disk and then write the iso file again! and the SCSI STATIS: oxo2 is here: http://docs.hp.com/en/J6373-90008/apas01.html#ciajabfd
IHoe, Thanks for responding, I am doing all of the things you suggested in your list in the invalid cdb field. I will try img burn. This is really getting frustrating as bb mayo guide said, it should be easy with dvd decrypter. I figured do it the easy way but am getting frustrated with all of the dvd's I am wasting. If I am not mistaken, I think I tried Img burn before but it does not take the mds file written by dvd decrypter. I tried nero, dvdfab, anydvd, and dvd clone. All with worse results than dvd decrypter. I will try again. I just did another burn with decrypter and it said successful but when I put it into the dvd player, by the way which is region free, it still would not play. Am giving up hope soon, as this makes cup coaster #9. I just cant figure out what is wrong yet. I will let you know how it goes with img burn. Thanks for you help.
