Hello, I have burned probably 150+ dvd's with my USB 2.0 LG GSA-5163D external dual layered burner. I run Windows XP Pro SP2 and use Nero 6.6.1.4 Burning Rom (I was using a slightly older version when the problem started and upgraded in hopes of a fix). I have recently upgraded my firmware (problem began before the upgrade). I can still burn dvd's in my internal drive, so I do not believe it is a software issue. I receive the PMA Update failure whether I use a Memorex DVD +R DL or a Verbatim 4.7gb. I attempted to burn different filesets (Video TS folders) so it would not be an issue with the data I am burning. I am running a pentium 4, 1.6mhz with 768MB RAM. Do you think my burner is simply finished, or is there something else going on here? I am trying to be thorough, but I am sure I have left something major out. Below is my Nero Log. I will post both the DL log and the 4.7gb log. Any help will be appreciated! Thanks, Rich Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4 Adapter driver: <USB 2.0> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-5163D D: CDRom2 LITE-ON DVDRW LDW-411S E: CDRom0 LITE-ON LTR-48246S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785712kB) Free physical memory: 544MB (557464kB) Memory in use : 29 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.3.2006 UDF/ISO compilation 10:21:48 PM #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 983 Backup file 'VIDEO_TS.BUP' should be identical to 'VIDEO_TS.IFO' 10:21:48 PM #2 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 983 Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO' 10:21:48 PM #3 Phase 117 File dlgbrnst.cpp, Line 1685 DVD-Video files compliance test failed 10:21:52 PM #4 Phase 132 File dlgbrnst.cpp, Line 1685 DVD-Video files compliance ignored 10:21:52 PM #5 Text 0 File Isodoc.cpp, Line 6475 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:21:52 PM #6 Phase 111 File dlgbrnst.cpp, Line 1685 DVD-Video files sorted 10:21:52 PM #7 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 10:21:52 PM #8 Text 0 File Reader.cpp, Line 124 Reader running 10:21:52 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:21:53 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:21:53 PM #11 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 10:21:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3416799 (759:17.24, 6673MB) 10:21:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 10:21:53 PM #14 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 10:21:53 PM #15 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:21:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3416800 (3416800) = #3416800/759:17.25 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3416800 blocks [HL-DT-ST DVDRAM GSA-5163D] -------------------------------------------------------------- 10:21:53 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6997606400, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3416800 | lead-out | 1 | 0x41 | 0x00 10:21:53 PM #18 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:21:53 PM #19 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:21:53 PM #20 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 10:21:53 PM #21 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 10:21:53 PM #22 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 10:22:02 PM #23 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2.4x (3,324 KB/s) 10:22:02 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:22:53 PM #25 SPTI -1194 File SCSIPassThrough.cpp, Line 289 D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1194) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 35 20 00 0E 73 04 Buffer x02de8200: Len xc 0x00 0A 00 00 00 00 00 00 00 1A 11 70 10:22:53 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 642 L0 Data Zone Capacity not set. Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB) 10:22:53 PM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1799 PMA update failure D: HL-DT-ST DVDRAM GSA-5163D 10:22:53 PM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 10:22:53 PM #29 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Log for the 4.7gb Verbatim failure: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4 Adapter driver: <USB 2.0> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-5163D D: CDRom2 LITE-ON DVDRW LDW-411S E: CDRom0 LITE-ON LTR-48246S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 52428800 (52428800) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785712kB) Free physical memory: 285MB (291980kB) Memory in use : 62 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.3.2006 UDF/ISO compilation 10:32:01 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation started 10:32:01 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation completed (no file modified) 10:32:01 PM #3 Text 0 File Isodoc.cpp, Line 6475 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:32:02 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685 DVD-Video files sorted 10:32:02 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:32:02 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 10:32:02 PM #7 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-5163D running 10:32:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:32:02 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:32:02 PM #10 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 10:32:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2222559 (493:54.09, 4340MB) 10:32:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 10:32:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:32:02 PM #14 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:32:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2222560 (2222560) = #2222560/493:54.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222560 blocks [HL-DT-ST DVDRAM GSA-5163D] -------------------------------------------------------------- 10:32:02 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4551802880, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2222560 | lead-out | 1 | 0x41 | 0x00 10:32:02 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:32:02 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:32:02 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 10:32:02 PM #20 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 10:32:02 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 10:32:02 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 16x (22,160 KB/s) 10:32:02 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:32:02 PM #24 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 10:32:02 PM #25 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 10:32:02 PM #26 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:33:13 PM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 289 D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1194) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 32 38 00 0C 73 04 Buffer x04530000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10:33:13 PM #28 CDR -1194 File Writer.cpp, Line 311 PMA update failure D: HL-DT-ST DVDRAM GSA-5163D 10:33:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:33:13 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:33:13 PM #31 Text 0 File DVDR.cpp, Line 3103 EndDAO: Last written address was -1 10:33:33 PM #32 CDR -1194 File WriterStatus.cpp, Line 167 PMA update failure D: HL-DT-ST DVDRAM GSA-5163D 10:33:33 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 10:33:33 PM #34 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
This particular version of Nero has certain bugs causing a few problems. I recommend you uninstall that version, run this clean tool to remove all traces http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this older bug free version from one of these links http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe Both logs look pretty clean except for the Verbatim log, you are burning at 16X which is far too fast, slow to 4X. You are using good quality media in both cases so hopefully the re install of Nero will overcome your problem, good luck. Please do yourself a favour dont use Memorex. The discs used in the first burn show Ritek which are OK.
Thanks for the help Gwendolin. Unfortunately that has not corrected my situation. I ran the Nero Cleaner, installed version 6.6.0.18 (I used to run the 6.6.0.15 without a glitch and then this problem started, which is why I upgraded to the most current version). I will paste the new logs in case there is info that might help determine the problem. As far as the Ritek disc, I am definitely using a Memorex branded +R DL disc. Is it possible that Ritek made it for Memorex? One other thing I should mention...a little while back I attempted to burn a pal video ts folder by "converting" it to NTSC by changing the headers of the ifo file. I've done this before successfully. It seems like something went wrong in that burn and the disc would not play or read in any player I tried it in (even though it burned "successfully" in this recorder). I remember when I tried playing it in this recorder, it hung the burner for a bit. I read somewhere that trying to read a disc with errors can cause a controller to revert to "PIO" and if you change it back to DMA, that could solve problems, but in my case the controllers are still on DMA. Since this is a USB 2.0 drive, do I need to be looking elsewhere for a DMA setting. Could the problem I am having have something to do with that burn or subsequent read attempt? I'm not sure how soon after this occurred that I started to have the problem. FYI - The drive will read dvd's fine at this point, it just won't burn. Thanks for the assistance! Rich Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0K - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW LDW-411S E: CDRom0 LITE-ON LTR-48246S F: CDRom1 HL-DT-ST DVDRAM GSA-5163D D: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785712kB) Free physical memory: 473MB (485044kB) Memory in use : 38 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.3.2006 UDF/ISO compilation 8:20:46 AM #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 974 Backup file 'VIDEO_TS.BUP' should be identical to 'VIDEO_TS.IFO' 8:20:46 AM #2 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 974 Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO' 8:20:46 AM #3 Phase 117 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance test failed 8:20:48 AM #4 Phase 132 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance ignored 8:20:49 AM #5 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:20:49 AM #6 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:20:49 AM #7 Text 0 File Reader.cpp, Line 127 Reader running 8:20:49 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:20:49 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:20:49 AM #10 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:20:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3416799 (759:17.24, 6673MB) 8:20:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:20:49 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 8:20:49 AM #14 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:20:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3416800 (3416800) = #3416800/759:17.25 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3416800 blocks [HL-DT-ST DVDRAM GSA-5163D] -------------------------------------------------------------- 8:20:49 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6997606400, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3416800 | lead-out | 1 | 0x41 | 0x00 8:20:49 AM #17 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:20:50 AM #18 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:20:50 AM #19 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:20:52 AM #20 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 8:20:52 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:21:44 AM #22 SCSI -1194 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04C70800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x20 0x00 0x0E 0x73 0x04 8:21:44 AM #23 Text 0 File DVDPlusDualLayer.cpp, Line 639 L0 Data Zone Capacity not set. Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB) 8:21:44 AM #24 CDR -1194 File ThreadedTransferInterface.cpp, Line 1778 PMA update failure 8:21:44 AM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 8:21:45 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0K - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW LDW-411S E: CDRom0 LITE-ON LTR-48246S F: CDRom1 HL-DT-ST DVDRAM GSA-5163D D: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785712kB) Free physical memory: 402MB (412020kB) Memory in use : 47 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.3.2006 UDF/ISO compilation 8:24:00 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:24:00 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:24:00 AM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:24:00 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:24:00 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:24:00 AM #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-5163D running 8:24:00 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:24:01 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:24:01 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:24:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2222559 (493:54.09, 4340MB) 8:24:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:24:01 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 8:24:01 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:24:01 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2222560 (2222560) = #2222560/493:54.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222560 blocks [HL-DT-ST DVDRAM GSA-5163D] -------------------------------------------------------------- 8:24:01 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4551802880, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2222560 | lead-out | 1 | 0x41 | 0x00 8:24:01 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:24:01 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:24:01 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:24:01 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 8:24:01 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:24:01 AM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 8:24:01 AM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 8:24:01 AM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 8:24:01 AM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:24:29 AM #25 SCSI -1194 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04290000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x38 0x00 0x0C 0x73 0x04 8:24:29 AM #26 CDR -1194 File Writer.cpp, Line 311 PMA update failure 8:24:29 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:24:29 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:24:30 AM #29 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 8:24:30 AM #30 CDR -1194 File WriterStatus.cpp, Line 167 PMA update failure 8:24:30 AM #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 8:24:30 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
