Yesterday I bought a Sony RDR-GX330 to replace my current DVD player and VCR. The hook-up seemed to go quickly, but I can't get it to work properly. The TV I'm using it with is a few years old so it doesn't have the AV output on it, thus I have to use an RF modulator (I'm also not using a cable box with this set up). So, I have the cable going from the wall to the modulator, from there to the dvd recorder, then finally to the TV. I then used the AV cable to connect the modulator to the dvd recorder. Well, when I did this (plugging them into the AV Line Out on the recorder), I don't get any TV signal w/the player turned on; the screen is blurry and looks like something out of "The Ring" and the TV makes all sorts of noise. When I change the input selector on the remote to L1 or L2 I can finally view the recorder menus, but the TV still makes the same noises. http://img149.imageshack.us/img149/3285/lineoutzk2.jpg[img] I then changed it up and plugged the AV cables into the Line In on the recorder ... I then get TV picture when the recorder is on, but I can't get into the recorder menus no matter what I press, or if I'm on L1, L2 or TV ... I called Sony and they had no idea ... anyone have any advice? [img]http://img140.imageshack.us/img140/2536/lineiniv2.jpg[img] Thanks!
I had someproblems too hooking it through amodulator the unit I had was a ilo 05 model that went toocrap then I just tried changing the plugs around like put the wall into the dvdrorder the the dvd into the modultor then too the tv from the modulatorand of course have the av wires hooked too the second imageyou have on here as a link
