Have used various parts of Nero to burn DVD's with no problem including Recode. However when I try using Recode to burn Main Movie to digital I don't get anything to play on my DVD player. Movie shows up in the preview screen while encodeing and the burn process goes through all of it's normal functions and says that it has successfully burned the project but nothing plays. Any ideas?
Here's Copy of Log. I tried a different approach to using Recode (THIS LOG IS NOT WHAT I DID HOWEVER). What I did was Recode Main Movie to Nero Digital but instead of burning it do DVD I sent it to a folder on my hard drive and then used NeroVision to put that File on a DVD and it worked, however that seems to be the long way around to get things done. Also the sound was very low on it. Any ideas? As I said the included log is from an ealier attempt to use Recode and burn to DVD. Hope you can offer some help. Project type: Main Movie to Nero Digital Target size: DVD5 (2282925) 07:40:30 File LangStreamPatcher.cpp, Line 56 Command table patching started... 07:40:30 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: _NEC DVD+-RW ND-3450A Number of copies: 1 Write speed: 5540 KB/s Temp folder: C:\Documents and Settings\Nick Stanojevich\My Documents\New Folder\New Folder (2) (41171271680 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL NeroDigital profile: Standard Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 07:42:08 File burn_ndigital.cpp, Line 158 NeroDigital: init 07:42:33 File NeroRecorderBase.cpp, Line 506 Writing to disc: D 07:42:33 File NeroRecorderBase.cpp, Line 520 Free capacity on disc: 2288767 sectors (2295104) 07:42:33 File burn_ndigital.cpp, Line 269 NeroDigital: burning 2288767 sectors (1057990 required) 07:42:33 File burn_ndigital.cpp, Line 301 NeroDigital: Adjusting target size 07:42:33 File burn_ndigital.cpp, Line 343 NeroDigital: beginning 1st-pass operation 07:42:33 File burn_ndigital.cpp, Line 697 NeroDigital: encode Kingdom of Heave Source: Size (720,576) Display Aspect Ratio (4,3) Deinterlace disabled Cropping enabled (0, 0, 0, 0) Resizing enabled (720,544) Pixel ratio (1,1) Bitrate: 4000000 bps 07:42:33 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\NICKST~1\LOCALS~1\Temp\\Kingdom of Heavea02392.bin 07:42:33 File burn_ndigital.cpp, Line 1192 NeroDigital: building graph Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 07:42:37 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 08:33:44 File burn_ndigital.cpp, Line 1018 graph completed successfully 08:33:47 File burn_ndigital.cpp, Line 391 NeroDigital: finished 1st-pass 08:33:47 File burn_ndigital.cpp, Line 407 NeroDigital: 0 files require 2nd pass 08:33:47 File burn_ndigital.cpp, Line 480 NeroDigital: beginning 2nd-pass operation 08:33:47 File burn_ndigital.cpp, Line 527 NeroDigital: Compiling volume completed successfully 08:33:48 File burn_ndigital.cpp, Line 557 NeroDigital: begin burn operation 08:33:48 File NeroRecorderBase.cpp, Line 1130 Burning 1 files with total size of 1660205752 bytes on hard disk Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.1.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 0, 1, 2 Recorder: <_NEC DVD+-RW ND-3450A> Version: 103C - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: Off CdRomPeripheral : _NEC DVD+-RW ND-3450A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-3450A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 190MB (195184kB) Memory in use : 62 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.11.2005 NeroAPI 8:33:52 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 8:33:52 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 8:33:52 AM #3 Text 0 File Writer.cpp, Line 113 Writer D: _NEC DVD+-RW ND-3450A running 8:33:52 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:33:52 AM #5 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 8:33:52 AM #6 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 810831 (180:11.06, 1583MB) 8:33:52 AM #7 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 8:33:52 AM #8 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: _NEC DVD+-RW ND-3450A, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 8:33:52 AM #9 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:33:52 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 810832 (810832) = #810832/180:11.7 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 810832 blocks [D: _NEC DVD+-RW ND-3450A] -------------------------------------------------------------- 8:33:52 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: _NEC DVD+-RW ND-3450A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1660583936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 810832 | lead-out | 1 | 0x41 | 0x00 8:33:53 AM #12 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:33:53 AM #13 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 8:33:53 AM #14 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 8:33:53 AM #15 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 8:33:53 AM #16 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 8:33:53 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:33:53 AM #18 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 10B50F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: W11 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 8:33:53 AM #19 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 8:43:38 AM #20 Text 0 File WriterStatus.cpp, Line 116 <D: _NEC DVD+-RW ND-3450A> start writing Lead-Out at LBA 810832 (C5F50h), length 0 blocks 8:43:39 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:43:40 AM #22 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 08:43:42 File burn_ndigital.cpp, Line 200 NeroDigital: exit
The only thing I can see in there is you might want to go to nero site and get the clean tool to uninstall incd. It can conflict even with some of nero. You also need to edit the log posted to remove nero key. It is where the quote is here but I xxxx it out in the quote. 08:33:48 File NeroRecorderBase.cpp, Line 1130 Burning 1 files with total size of 1660205752 bytes on hard disk Windows XP 5.1 IA32 WinAspi: -
Nero Digital puts out a file that is mpeg4 and similar to DivX is your player capable of playing the format?
Thanks deleted number. Also unistalled InCD. Also log posted is everything that I had. Any idea what's missing.Also when I ran the digital file off of my hard drive (initially done through Recode) through NeroVision isn't it still in the MPeg4 format? If so it played fine when I burned it using NeroVision but no when I try Recode.
Vision is making dvd which is mpeg2, as vob, ifo, and bup files. From what I gather recode is making mpeg4 called mp4 at nero which is mpeg4 kinda like divx. At the moment I dont know of a set top player that will play mp4 from nero. There are many that will play divx and xvid.
whompus ,Philips has a deck that WILL play mpeg-4 the model number is Philips DVP642/37 its stated on the box " You have It ,We Play It" matter of fact i just got one tonight.LOL they run about 60 bucks ,also it plays both formats NTSC and PAL very good deck for the money
Yeah I have tha 642/37 for a while now. I love it for divx, xvid, and divx vod after I regestered it with divx.com. I cant get it to play nero version of mpeg4 though there mp4 extension. I have played lots of divx vod with it. A few divx and 1 xvid. Do you know if just changing the extension of the nero digital file will work? I guess I can just try it and see.
I just got finished testing that. No go that way either. The 642 spins up trys to read then just open the drive for both mp4 file and the renamed file. Also the Divx player will not play them on the comp. It reports error Audio data: Tag 5376. I think its some kind of radical mix of mpeg4 video and aac audio or something like that. It goes further to state that the video might play but will have no audio. Key there is might. It did not show anything except the counter going like it was playing. Had black screen and no sound. Same for mp4 from nero and when changed tag to divx. So I decided to try Quicktime and it reported it as not being a video file.
good try anyway , thoses kind of files probably arent going to be playable it looks like BTW, glad to have you x copy guys aboard in here your a big help thanks
I'm using the same DVD player. At leat I knoew now I've got the right player. Wish I could get it to work with the Recoded versions though. Tried everything but still no luck. Thanks for the helpo though
Yup. You got good player there. Sorry we got sidetracked on your thread for a bit. At least it was with a player you have. If I find anything on this I will post here for you to see.
