When I goto burn a DVD I get a msg saying there is more PAL than NVCD, and if I want to use PAL or NVCD. Either one I choose, it will burn for about 3 secs then just goto the start up screen. no error msg or anything. Is there any way to remedy this? I am a noob at burning. thx
Daxton, If you want to burn .avi to dvd discs and be able to watch them on your dvd player, you must convert the .avi file first by using nero express vision. Before you convert the avi file, you will get that same message. I usually just click No. Follow this great guide below. http://forums.afterdawn.com/thread_view.cfm/1/272946
nope. I did the same thing. it transcodes for a few seconds then just disapears. no error or warning or anything. just gone.
Your Nero log gives information on your burn, it can be found here, only the last one is needed Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt
I dont know if this will help but here is the history core: ------------------------------------------------------------------------ ---without serial number--- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <SONY DVD RW DRU-800A> Version: KY04 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-248F >Version: R602 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F D: CDRom0 SONY DVD RW DRU-800A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523264kB) Free physical memory: 255MB (261964kB) Memory in use : 49 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2006 CD Copy 2:39:48 PM #1 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:39:48 PM #2 Text 0 File Burncd.cpp, Line 3007 SONY DVD RW DRU-800A Power-Burn activated 2:39:48 PM #3 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 2:39:48 PM #4 Text 0 File Reader.cpp, Line 124 Reader running 2:39:48 PM #5 Phase 48 File dlgbrnst.cpp, Line 1724 Analyzing disc 2:39:48 PM #6 CDCOPY -1 File CDCopy.cpp, Line 1915 The CD is copyrighted 2:39:49 PM #7 Text 0 File CDCopy.cpp, Line 2131 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 268104 268103 ( 59:36.53) 2:39:49 PM #8 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 268104 = 268104, data (TRM_DATA_MODE1, block size 2048) 2:39:49 PM #9 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using CD-R/RW media 2:40:58 PM #10 Phase 40 File dlgbrnst.cpp, Line 1724 Aborted by user 2:40:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 277 Disc check failed: Medium not allowed (Wrong CD) 2:40:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 2:40:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: SONY DVD RW DRU-800A Medium not present 2:40:58 PM #14 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD-ROM. Medium required by compilation: CD-R/RW.) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 8:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 5c80001080000000008666123019 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <SONY DVD RW DRU-800A> Version: KY04 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-248F >Version: R602 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F D: CDRom0 SONY DVD RW DRU-800A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523264kB) Free physical memory: 256MB (262832kB) Memory in use : 49 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2006 CD Copy 2:42:06 PM #1 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 2:42:06 PM #2 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 2:42:06 PM #3 Phase 23 File dlgbrnst.cpp, Line 1724 Reading disc aborted Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 8:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 5c80001080000000008666123019 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <SONY DVD RW DRU-800A> Version: KY04 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-248F >Version: R602 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F D: CDRom0 SONY DVD RW DRU-800A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523264kB) Free physical memory: 40MB (41472kB) Memory in use : 92 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.4.2006 CueSheet 10:01:19 AM #1 Text 0 File Burncd.cpp, Line 3007 SONY DVD RW DRU-800A Power-Burn activated 10:01:21 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 10:01:21 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:01:21 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-800A running 10:01:21 AM #5 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using CD-R/RW media 10:03:17 AM #6 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 247113 ( 54:56.63) 10:03:17 AM #7 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 10:03:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: SONY DVD RW DRU-800A 10:03:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.) Disc not empty. Insert empty disc. (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.) 10:03:17 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 450 (450) = #450/0:6.0 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 450 blocks [E: SONY DVD RW DRU-800A] 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (0) provided original disc pos #0 + 246664 (246664) = #246664/54:48.64 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 246664 blocks [E: SONY DVD RW DRU-800A] -------------------------------------------------------------- 10:03:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: SONY DVD RW DRU-800A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1411200, ISRC "" 2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1411200 1411200 581564928, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 450 | 2 | 0 | 0x41 | 0x00 450 | 2 | 1 | 0x41 | 0x00 247114 | lead-out | 1 | 0x41 | 0x00 10:03:18 AM #12 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:03:29 AM #13 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 10:03:30 AM #14 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 10:03:30 AM #15 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 10:03:30 AM #16 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 40x (6,000 KB/s) 10:03:30 AM #17 SPTI -1189 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02 Buffer x0383e600: Len x4000 10:03:30 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:03:30 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450 10:03:30 AM #20 Text 0 File MMC.cpp, Line 16828 StartDAO : CD-Text - Off 10:03:30 AM #21 Text 0 File MMC.cpp, Line 21541 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 10:03:30 AM #22 Text 0 File MMC.cpp, Line 17059 CueData, Len=40 41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00 41 01 01 21 00 00 02 00 41 02 01 21 00 00 08 00 41 aa 01 34 00 36 38 40 10:15:00 AM #23 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-800A> start writing Lead-Out at LBA 247114 (3C54Ah), length 0 blocks 10:15:00 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:15:06 AM #25 Phase 37 File dlgbrnst.cpp, Line 1724 Burn process completed successfully at 40x (6,000 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 8:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== ------------------------------------------------------------------------ thx...again
I found a program that works GREAT!!! Its called "convertxtoDVD" You add any file, hit convert, when its done a "burn" button comes up, you hit BURN and a few minutes later, you got a dvd ready to go. it makes chapters automatically and was dirt cheap. thx all for helpin
Yes I agree with you, it is a very good program, I also own it. For your information, heres where your error occurred in the failed burn Apparently you had the wrong type of disc inserted to burn to.
