I used dvd shrink to burn my re-author movies onto my ridata 4x dvd-r's. I ma trying to make another backup from my original backup, apparently when I try to burn a cpoy on nero I am getting an error message. Also if I try to burn it in dvd shrink it stops in the same spot and doent let me burn it. whats going on? Its happening to all my backups. thanks
what error message are you getting? If I make a copy of a copy, I use DVD Decrypter. MOde: ISO Read to copy from the original copy to the hard drive, then Mode: ISO write to write it back to the new blank disc. Works everytime, unless there's a problem with the original copy.
OK. If you have a problem, Decrypter generates a log, so cut and paste the entire log in your next post. Without knowing the error message it would be hard to diagnose your problem.
open dvd shrink click on open disk and select your drive it shouldwrite the iso to your hd what method are you using. and what errors do you recieve copy and paste log here we will be waiting
so far I got this : I 20:56:12 DVD Decrypter Version 3.5.4.0 started! I 20:56:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1) I 20:56:12 Initialising SPTI... I 20:56:12 Searching for SCSI / ATAPI devices... I 20:56:13 Found 1 CD-ROM and 1 DVD±RW! I 20:56:56 Operation Started! I 20:56:56 Source Device: [1:0:0] _NEC DVD_RW ND-3520A 1.04 (D (ATA) I 20:56:56 Source Media Type: DVD-R (Disc ID: RITEKG04) I 20:56:56 Source Media Region Code: 1, 2, 3, 4, 5, 6, 7, 8 I 20:56:56 Source Media Copyright Protection System Type: None I 20:56:56 Source Media Implementation Identifier: AHEAD Nero I 20:56:56 Destination File: C:\NEW.ISO I 20:56:56 File Splitting: Auto I 20:56:56 Detect Mastering Errors: No I 20:56:56 Remove Macrovision Protection: Yes I 20:56:56 Extracting Sectors... (LBA: 0 - 2286111) I 20:56:56 Found IFO File: VIDEO_TS.IFO - (LBA: 279 - 281) I 20:56:56 Found BUP File: VIDEO_TS.BUP - (LBA: 282 - 284) I 20:56:56 Found IFO File: VTS_01_0.IFO - (LBA: 285 - 322) I 20:56:56 Found VOB File: VTS_01_1.VOB - (LBA: 323 - 524609) - KEY: N/A I 20:58:32 Found VOB File: VTS_01_2.VOB - (LBA: 524610 - 1048896) - KEY: N/A I 20:59:55 Found VOB File: VTS_01_3.VOB - (LBA: 1048897 - 1573183) - KEY: N/A I 21:01:26 Found VOB File: VTS_01_4.VOB - (LBA: 1573184 - 2097470) - KEY: N/A Im getting read errors now at 84% but its weird all of my copies read this and I made 4 copies from originals.
What you posted of the Decrypter log shows no errors. Generally, when a sector can't be read, this is a problem of the burner/reader or a bad original disc. Your DVD reader is having trouble pulling the information off the disc. I/O errors. Try cleaning the disc (even if it looks clean) and buffing/repairing any scratches. If this is happening to all of your burned discs, maybe the reader/burner is going out. Try borrowing a friend's burner and see if the cleaned discs can be read there. If so, clean your burner.
If your burner's only a few days old, then I'd say the problem is this new burner doesn't like those discs. Burners are more sensitive to discs than plain old tabletop players. Check your firmware. Even tho it's only a few days old, there might be an update that cures this problem.
@Nykid - latest firmware for 3520A appears to be 3.04 - see here - http://forums.afterdawn.com/thread_view.cfm/202355 You could have errors on the original copies. Download dvdinfopro (free) and run one of them thru it's CRC check to see of there is any corruption there. Also, using dvdinfo, run one of those discs thru it's media info check so we can see if the media used, is of a decent maunufacturer. Also, i'd like to see any error logs from Nero. Nero logfile is in c:\program files\ahead\nero\nerohistory.log. All burns, good and bad are appended to this logfile so only post the last section of log, omitting the SERIAL number which usually begins with '1A21' or similar.
I just updated my firm ware. I had v1.0 now im updated to version 3.0 Im using Ridata 4x dvd-r blanks. I tried burning the discs again and encountered the same problem.
right, let's have last section of nero log as i mentined in last reply...don't forget to omit the serial number...
here is one of them I tried to burn..: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12e (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-3520A D: CDRom0 SAMSUNG CD-ROM SC-152L E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 9MB (9308kB) Memory in use : 98 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.6.2005 DVD-Copy over Image 9:57:02 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:57:02 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 9:57:02 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:57:02 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:57:02 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 9:57:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2286111 (508:01.36, 4465MB) 9:57:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 9:57:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 9:57:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:57:03 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [Image Recorder] -------------------------------------------------------------- 9:57:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 9:57:03 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 9:57:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:03:29 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066F1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x04 0x43 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x04 0x43 0xD0 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 10:03:29 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:03:29 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1128 10:03:29 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:03:31 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 13, 3, size=99456 bytes, created 3/16/2005 2:40:24 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 13, 3, size=29056 bytes, created 3/16/2005 2:40:06 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 13, 3, size=8704 bytes, created 3/16/2005 2:40:28 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
heres another... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12e (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-3520A D: CDRom0 SAMSUNG CD-ROM SC-152L E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 441MB (452328kB) Memory in use : 13 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.6.2005 DVD-Copy over Image 7:24:27 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 7:24:27 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 7:24:27 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 7:24:27 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:24:27 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 7:24:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2286111 (508:01.36, 4465MB) 7:24:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 7:24:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 7:24:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:24:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [Image Recorder] -------------------------------------------------------------- 7:24:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 7:24:27 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 7:24:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:33:53 PM #14 SCSI -1093 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06723000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x1F 0x9D 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x1F 0x9D 0xC0 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 7:33:53 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 7:33:54 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1093 7:33:54 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:33:55 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 13, 3, size=99456 bytes, created 3/16/2005 2:40:24 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 13, 3, size=29056 bytes, created 3/16/2005 2:40:06 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 13, 3, size=8704 bytes, created 3/16/2005 2:40:28 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@Nykid - - dunno what's going on there, your burner isn't listed here.. hmmm... you haven't got the burner selected when you go to burn.. hmmm... - DMA needs to be on for that drive - fix it like this - - you're writing a single-layer movie ie 4.4GB to a dual-layer ie 9GB disc. Not a problem but very wasteful as dual-layer discs are expensive - - don't know enough about this error apart from the obvious 'CD type reading failed' - sounds like it has a problem with that media - your drive doesn't like/recognise that media - splat! - that's more like it, i'd uninstall Nero, then run the Nero clean tools to uninstall any remaining Nero bits 'n pieces; see here - " http://www.nero.com/en/Clean_Tools.html ", then reinstall Nero, but [bold]NOT[/bold] installing Nero InCD this time. InCD is packet writing software which interferes with standard Nero Burning Rom
error reading media again at 80%..oh well..I guess the media is corrupted on the 5 otehr dvd's I backed up. I did burn 3 other movies without a problem but they werent copy protected.
I dont know if I made myself clear. I am trying to ripp the copy of the movie I had into my computer again in order to make another duplicate..all of my duplicates are not letting me do that.
