Problem with FTP!

Discussion in 'Xbox - Hardware mods' started by bambo13, May 14, 2005.

  1. bambo13

    bambo13 Member

    Joined:
    May 12, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hi!

    For the last few days, I tried to FTP my Xbox without success. Here is a list of my accessories:

    - A softmodded Xbox (UnleashX & Evox)
    - PC (Windows XP Pro) with a Network card
    - 1 Ethernet cable (crossover)
    - FlashFXP & CuteFTP

    First of all, I desactivated the firewall on Windows. After, I went to the Control Panel, Network Connections, Local Connection, Internet Protocol (TCP/IP) and went in the properties. I changed the IP to 192.168.0.3 and the subnet mask to 255.255.255.0 Then, I restarted my PC. I open my Xbox (UnleashX) and went in the Network properties. I put a static IP and put as IP 192.168.0.2 and subnet mask 255.255.255.0 Then I closed my Xbox. I connected my PC to my Xbox with my crossover cable and started the Xbox, and both machines (Xbox & PC) detected the cable. After, I open FlashFXP, I do quick connect, put as Server 192.168.0.2, username and password is xbox, on port 21. I also checked off passive mode. When I try to connect, it says "Connection timed out" and it doesn't work. It does the same with Evox.

    Here are more details on the configurations on my Xbox.

    Network enabled: Yes
    Type: Static
    IP: 192.168.0.2
    Subnet mask: 255.255.255.0
    Gateway: 0.0.0.0
    DNS1: 0.0.0.0
    DNS2: 0.0.0.0

    Please tell me what I have to do to FTP my Xbox!

    Thanks a lot!

    Mike
     
  2. bambo13

    bambo13 Member

    Joined:
    May 12, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Come on guys tell me what's wrong!
     
  3. jabberjab

    jabberjab Member

    Joined:
    Jun 13, 2005
    Messages:
    94
    Likes Received:
    0
    Trophy Points:
    16
    plug in your crossove cable
    on your xbox set use static ip to yes
    on your pc go to control panel.... network settings
    right click on local aera connection.... choose properties
    there should be an option called internet protocol tcp/ip... double click this... now you need to assign an ip addy to your pc... it should be 3 higher than your box.... eg... xbox ip is 192.168.1.200.... pc ip should be ... 192.168.1.203
    now the subnet mask for xbox and pc match
    click ok
    on your box set the default gateway to the same ip you just gave your pc... save and exit and reeboot box... now use flash fxp
     
  4. mdsup

    mdsup Guest

    just set your xbox gateway to the same thing as your pc ip, and you should be good to go.
     
  5. jabberjab

    jabberjab Member

    Joined:
    Jun 13, 2005
    Messages:
    94
    Likes Received:
    0
    Trophy Points:
    16
    yes but check all above settings.... one . or a number outta place and it all goes tits up
     
  6. Xstation3

    Xstation3 Guest

    if that doesnt work then u can try hooking up ur xbox and pc to a router if u have one ande connecting to the assigned ip address. that way it is much easier and u wont have to assign or change anything :p

    ----
    cant get my sig to fricken work!!!
     
    Last edited by a moderator: Jun 16, 2005
  7. Inam

    Inam Member

    Joined:
    Oct 28, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    hey i hooked my xbox up to a pc and a router and im still clueless on what to do next. Basically I got the wires in and I need help figuring out whats next.

    However my router is connected to a gateway dsl.
     
  8. Xstation3

    Xstation3 Guest

    sorry, take off static ip adresses and remove the ip adress u put in or ur comp. also dont use crossover when connectiong to a router its already like done that inside the router. get patch cables.
     

Share This Page