Problem with PSO exploit

Discussion in 'Nintendo Gamecube - General discussion' started by _mario64, Jun 20, 2006.

  1. _mario64

    _mario64 Member

    Joined:
    Jun 19, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I would want to stream a iso from pc to gc,with the PSO method.
    With the GC Disc Server i can upload the loader.dol file ,the GC starts executing it,and i see a black screen with a gray message wich says "INITIALISING..."
    From now on,the iso file should start uploading from pc to gc,but it doesn't :(
    In fact,i see the HD led always off,which means that the hd is not being read.

    I don't think the problem is the packet frequency and delay,because they are set to delay=20 and frequency=16 (and cache=4)
    In the worst case there will be some packet loss in the gamecube side,but at least the file would be streamed from pc.

    Could someone tell me what i've done wrong?
     
  2. _mario64

    _mario64 Member

    Joined:
    Jun 19, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Another thing : i have also a Qoobo SX chip installed,but i need to use the PSO exploit for streaming isos from pc because the laser is not properly powered , sometimes it can't read the disc and the game crashes...regardless of the type of support,i tried different ones,(princo,verbatim, and philips).

    I don't want to adjust the laser power for now,because i'm not sure that the problem is just the laser...
    I also could try to make a minidvd with the loader.dol file , than directly boot it from gamecube,without the need of using phantasy star,and it should connect to the pc with the GC Disc Server , is it so?

    I'll try it,but in the meanwhile tell me what i've mistaken in streaming isos with the common method
    thank you
     
  3. _mario64

    _mario64 Member

    Joined:
    Jun 19, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    tell me also if i can try anything else :)
     
  4. silver95

    silver95 Regular member

    Joined:
    Oct 25, 2005
    Messages:
    220
    Likes Received:
    0
    Trophy Points:
    26
  5. gamemaste

    gamemaste Member

    Joined:
    Aug 7, 2004
    Messages:
    74
    Likes Received:
    0
    Trophy Points:
    16
    during "INITIALISING..." the GC is loading the .dol so the dol has already been sent but after "INITIALISING..." the program will ask for you to press start and thats when the iso starts streaming

    you can also mess around with ur cache size (some guy said it worked better at 80?)

    - or use a diffeernt loader
     
  6. Quezacotl

    Quezacotl Regular member

    Joined:
    Feb 4, 2005
    Messages:
    977
    Likes Received:
    1
    Trophy Points:
    26

Share This Page