i get "PROGRAMMING ERROR-OCCURED" THE HANDLE IS INVALID.this is the first time i get this error message.i tried doing the stiil image but it didnt work.all it does is show an image flickering on and off then it give error message.
well here I am again I also am trying to burn punisher get same error I have burned using Shrink w/Decryter and Shrink w/Nero and dvd x copy but never with DVD Decrypter first. please explain to me how to do this do not know how.still consider myself a newbee.
[bold]Rip[/bold] with DVD Decrypter first in file mode. Then open the file with Shrink and use Shrink to compress it. Open Decrypter -> click mode -> File F
I had the same "PROGRAMMING ERROR-OCCURED" just about the end of the shrink process. I did use dvd decrytor first!
Hey I just copied punisher and I can get it to work. However it is very choppy and slow. I can view most of it fine if I try to use Real Player. But the last few scene's play with commentary. I don't really know how to get rid of the commentary, but At least I can watch it this way.
well i backed up the punisher using dvd shrink and than clone dvd to burn the movie. it plays fine, i didnt know this movie was causing alot of people problems.
Hi guys…newbie here using shrink and nero. I had the exact problem with Punisher as mentioned above. I followed the suggestion and changed the setting in the “unreferenced material” section to “still image”. Worked perfectly! Then I tried another new dvd named Secret Window. It would encode up to 97% then it crapped-out after that and gave an error about copy protection. I tried changing the setting as with the Punisher disc, and that kept it from crashing out after 97%. I was able to backup the disc and it works in my rca dvd player, but it WILL NOT play on my computer. Any ideas why it does that or how I can keep it from crashing after 97% without changing the setting to “Still Image”? Jim
I'm having the prob with Punisher too. I just get the kid jumping at the beginning and that's all it gets to. The disk plays fine on a stand alone or on the computer with power dvd, but can't watch it with dvd shrink. I've tried all the ideas, changing the unreferenced to still image and unchecking nero. Nothing helps. I know I can just reauthor and do the movie only. I just want to be able to do the whole thing since other people can. I've tried with shrink 3.2 and 3.1.
I was able to burn punisher w/out a problem as well.... i didn't even have to change and preferences or nothing.
I also had no problem with this movie using decrypter in file mode>shrink to compress and encode>nero v.63125. However I did incur nero verification errors as shown in my nero log file. It presents with a sense key error(KEY_MEDIUM_ERROR) an error during reading various sectors and a read error on cd file. Is this cause for concern as I want to eliminate any and all possible errors in the future. As this is my first dvd burn with the above mentioned combo. DMA is active on IDE channels and I will check for updates.Joilet is false?Any information will be appreciated..Thanks crew. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM Nero version: 6.3.1.25 Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 0 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S480/AH >Version: 0.87 - HA 0 TA 1 - 6.3.1.25 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/AH atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP1614C atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVD+RW SOHW-802S E: CDRom0 ASUS CD-S480/AH F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1015MB (1039660kB) Free physical memory: 697MB (714232kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.10.2004 UDF/ISO compilation 1:15:12 AM #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 1:15:12 AM #2 Phase 114 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed (no file modified) 1:15:12 AM #3 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:15:12 AM #4 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 1:15:12 AM #5 Text 0 File Reader.cpp, Line 126 Reader running 1:15:12 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:15:12 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:15:12 AM #8 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 1:18:18 AM #9 Phase 40 File dlgbrnst.cpp, Line 1855 Aborted by user 1:18:18 AM #10 Text 0 File DlgWaitCD.cpp, Line 247 Total nr blocks on disc: 4571711 (1015:56.11) , 4464MB Max nr blocks on disc: 2664000 (592:00.00) , 2601MB 1:18:18 AM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 1:18:18 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: LITE-ON DVD+RW SOHW-802S Medium not present 1:18:18 AM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) Not enough free discspace. (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 03/03/2004 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 24/10/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Nick Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM Nero version: 6.3.1.25 (Nero Express) Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 0 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S480/AH >Version: 0.87 - HA 0 TA 1 - 6.3.1.25 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/AH atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP1614C atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVD+RW SOHW-802S E: CDRom0 ASUS CD-S480/AH F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1015MB (1039660kB) Free physical memory: 611MB (625852kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.10.2004 UDF/ISO compilation 1:28:31 AM #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 1:28:31 AM #2 Phase 114 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed (no file modified) 1:28:31 AM #3 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:28:31 AM #4 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 1:28:31 AM #5 Text 0 File Reader.cpp, Line 126 Reader running 1:28:31 AM #6 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVD+RW SOHW-802S running 1:28:31 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:28:31 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:28:31 AM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 1:28:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 1:28:32 AM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 1:28:32 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R 1:28:32 AM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:28:32 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVD+RW SOHW-802S] -------------------------------------------------------------- 1:28:32 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286128 | lead-out | 1 | 0x00 | 0x41 1:28:32 AM #16 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 1:28:32 AM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 1:28:32 AM #18 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 1:28:32 AM #19 Phase 28 File dlgbrnst.cpp, Line 1855 Speed measurement started 1:28:32 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:29:59 AM #21 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks 1:29:59 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:29:59 AM #23 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:29:59 AM #24 Phase 29 File dlgbrnst.cpp, Line 1806 Speed measurement completed: 39x (53,840 KB/s) 1:29:59 AM #25 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 8x (11,080 KB/s) 1:29:59 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:29:59 AM #27 SCSI -1066 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03205000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 1:29:59 AM #28 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 7:11,336 (431336ms) -> OK 1:29:59 AM #29 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 1:38:53 AM #30 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks 1:38:53 AM #31 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:40:01 AM #32 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:40:01 AM #33 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:40:01 AM #34 Phase 37 File dlgbrnst.cpp, Line 1855 Burn process completed successfully at 8x (11,080 KB/s) 1:40:01 AM #35 Phase 78 File dlgbrnst.cpp, Line 1855 Data verification started 1:49:35 AM #36 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0586D000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x21 0x47 0xDF 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 1:49:35 AM #37 Text 0 File DriveFileSystemBlockReader.cpp, Line 231 Error during reading the sector: 2181087 1:49:35 AM #38 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1686 Read error on CD file VIDEO_TS\VTS_02_1.VOB 1:49:41 AM #39 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05877000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x21 0xE3 0x45 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 1:49:41 AM #40 Text 0 File DriveFileSystemBlockReader.cpp, Line 231 Error during reading the sector: 2220869 1:49:41 AM #41 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1686 Read error on CD file VIDEO_TS\VTS_03_1.VOB 1:50:13 AM #42 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385 Status summary Total files=21, identical=19, different=0, inaccessible=2, skipped=0. 1:50:13 AM #43 Phase 81 File dlgbrnst.cpp, Line 1855 Data verification failed Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 03/03/2004 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 24/10/2002 3:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Think I figured this one out folks... I found a few DVD's with the "unreferenced material" section, and it seems the ones that I have trouble with are ones with a certain frame sequence in it. It starts with a sunrise, and then has fades real quick to a skinny white dude in track shorts jumping in the air, pre fontain style. For instance, on along came polly, the unreferenced material is mainly previews, but there is one chapter in that VTS set that is a 1 MB clip of this same sequence. Kill that 1 MB sequence, and no more problems. Doesn't matter what you use to rip or shrink em, but it seems that most recoders (nero or dvdshrink, or dvd2one) can't seem to process that scene. If you just kill that one scene, you can save the rest of the unref'ed material, such as previews. So, before you burn your DVDs, just check the unrefed material for that scene. Hope this helps.
That info about the 1MB sequence is worth looking into. I just got Punisher to work, after doing a search on Google, it appears everyone was having probs with it. It WORKS with DVD shrink 3.17 I ended up installing a parallel install of dvd shrink for these problematic discs.
Hello, im having problems with the Van Helsing DVD also, what happens is that in the video quality i noticed that there are "small digital blocks" on the image. Like lets say for the cgi shots, the cgi when it moves, there are small digital squares in the shot. I checked on 'Enable overlapping', 'read 32bk blocks...' and i also used "maximum smoothness, "sharp (default)" and it still looks the same. Can someone please tell me how to fix the small digital squares that appear in the picture. Thank you.
linkinpht, Posting this three times in three threads will not help your cause. And it's against forum rules Use this thread: http://forums.afterdawn.com/thread_view.cfm/123212
Hi I too have noticed that the scene with the guy in the green shorts causing problems copying discs. But I'm wondering, how do you "kill" just that one scene and keep the rest of the disc wo using reauthor mode? What do you mean by "kill" it? Thanks! Tammy
