Hi all. I have had this problem for a few weeks now and I thought. If you have a problem got to the best people to help. So that is you guys. I had a pioneer dvr-108 burner and everything was going fine then all of a sudden it wouldn't burn. I normally use alcohol 120%, But everytime I tried to back up something or burn a cue file it would get to about 3% and then my pc would freeze up. So i thought I would try nero. Using nero would be able to read the disk but when it came to burning it. it would get to about 25% and then the buffer level bar and the one above it would drop down to zero and then start back up, but the drive stopped burning. I thought my Burner was broke so I brought a new pioneer dvr-110 but I am still having the same problems. I have updated the aspi and firmware. I just dont know what to do now. Any help you can give me would be much appreciated Thanks Liverp
you obviously need to go and check out the forum rules .Multiposting isnt allowed with in the forum.Please stop. http://forums.afterdawn.com/thread_view.cfm/228285 http://forums.afterdawn.com/thread_view.cfm/228624
I know I multi-posted. But I also realised that my first post about this was posted in the wrong forum. I am sorry about that. I didnt realise it was such a crime. I wont bother again Liverp
if you know you have posted in the wrong forum rather than post in the right forum, let a mod or an addict know so that we can get it moved to the right area.I'm not here to tell you off i'm just pointing out the way the board runs and to make sure that you 1.get your questions answered 2.you understand the rules 3 hopefully have an enjoyable experience and want to come back for more. Your question and about moving it has been raised with the mods ,so it should be moved shortly and the other thgread you started or this one will be closed. Now as to your question! what media are you using? did the burner work before you updated the firmware? do you get error messages? can you produce the nerologs?
Sorry I replied a bit sharpest. This probllem is now getting on my nerves. 1.I have been using 8X Printable G05 RITEK DVD-R. I have always used then and never had a problem before. 2. The burner stopped working before I updated the firmware. Thats why I updated it. 3. I dont get any error messages. Nero keeps going. The progress bar just stops and the green light on my burner stops. I have to manually shut down nero. 4. I will produce a nero log tomorrow as I have no Media left. Some more will arrive tomrrow Thanks Liverp
don't worry about producing another log, the burns append to c:\program files\ahead\nero\nerohistory.log, so you can just post the LAST section but not your serial number which usually begins with '1A21' or similar... the logfile will most likely be sufficient to get you burning, then when the new discs arrive you can just do 'simulation' burns thus not writing to any discs 'til your settings are all sorted...
checked my log and the problem is my history is all using my samsung Cd-RW. I have been backing up music alot since the dvd burner went weird.
Got my blank dvds and tried to burn and iso I made. didnt work: so here is my log: IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 24/08/2005 15:50:45 Nero version: 6.3.1.10 Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.08 - HA 2 TA 1 - 6.3.1.10 Adapter driver: <> HA 2 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <SAMSUNG CDRW/DVD SM-348B>Version: T505 - HA 2 TA 0 - 6.3.1.10 Adapter driver: <> HA 2 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-110D nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400EB-11CPF0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off === CDRom-Device-Map === Generic DVD-ROM H: CDRom2 SAMSUNG CDRW/DVD SM-348B E: CDRom1 PIONEER DVD-RW DVR-110D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523632kB) Free physical memory: 182MB (186864kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.9.2005 Burn DVD Image 19:17:32 #1 Text 0 File Reader.cpp, Line 118 Reader running 19:17:32 #2 Text 0 File Writer.cpp, Line 124 Writer PIONEER DVD-RW DVR-110D running 19:17:32 #3 Text 0 File Burncd.cpp, Line 3200 Turn on Disc-at-once, using DVD media 19:17:32 #4 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1481717 (329:16.17, 2893MB) 19:17:32 #5 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 19:17:32 #6 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 19:17:32 #7 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:17:33 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1481718 (1481718) = #1481718/329:16.18 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1481718 blocks [PIONEER DVD-RW DVR-110D] -------------------------------------------------------------- 19:17:33 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3034558464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1481718 | lead-out | 1 | 0x00 | 0x41 19:17:33 #10 Phase 36 File dlgbrnst.cpp, Line 1841 Burn process started at 6x (8,280 KB/s) 19:17:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 19:17:33 #12 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 6:14,919 (374919ms) -> OK 19:17:33 #13 Text 0 File DVDR.cpp, Line 1650 Recording mode: Sequential Recording Mode for Multisession 19:17:33 #14 Text 0 File Mmc.cpp, Line 20051 Set BUFE: supported -> ON 19:17:33 #15 Text 0 File DVDR.cpp, Line 1791 Start write address at LBA 0 DVD high compatibility mode: Yes 19:17:33 #16 Text 0 File Cdrdrv.cpp, Line 8024 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:17:36 #17 Text 0 File Cdrdrv.cpp, Line 1291 19:17:36.125 - PIONEER DVD-RW DVR-110D\H2 T1 : Queue again later 19:18:00 #18 SCSI -1128 File Cdrdrv.cpp, Line 1439 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x039F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x10 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0x04 0x50 0x0E 0x00 0x00 0x00 0x00 0x11 0x05 19:18:00 #19 CDR -1128 File Writer.cpp, Line 304 Unrecoverable read error 19:18:00 #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 19:18:00 #21 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 19:18:00 #22 Text 0 File DVDR.cpp, Line 2001 EndDAO: Last written address was 783 19:18:00 #23 Phase 133 File dlgbrnst.cpp, Line 1841 Writing short lead-out 19:18:46 #24 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 0:00,000 (0ms) -> OK 19:18:46 #25 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 0:00,000 (0ms) -> OK 19:18:46 #26 Phase 38 File dlgbrnst.cpp, Line 1841 Burn process failed at 6x (8,280 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Bus Type : via Inquiry data (1) ->[bold] ATAPI, detected: ? [/bold] check your aspi layer installed ok? also maybe your chipset drivers? === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-110D nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400EB-11CPF0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off you also need your DMA turned on! via device manager your disc arnt to good either >>>> Disc Manufacturer: CMC MA - G. AE1 Burn process started at 6x (8,280 KB/s) <<<<<-- try slower too
@Liverp - that Rotary, he's like a speed demon!.. - too old, update to latest, 6.6.0.16 - firmware's out of date, 1.17 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2140 - question mark meams burner is either external, Usb or whatever, or your atapi drivers have been mislaid - yup, Nero's too old to recognise your burner, update firmware - reload the nvidia motherboard drivers as DMA needs to be ON - 512mb is sufficient total memory. for info, close down more programs prior to any burns to free up memory - oh dear, CMC Magnetics should be banned from producing dvd media, their discs are utter rubbish. buy decent media - just checking, did you know you're not 'closing' or 'finalising' the disc - splat!
hi hey there creaky, i tell ya mate i love reading your replys they are so neat and tidy they are dam spot on, the work you do to sort just the page layout is one thing but to find all the problems for the user is brilliant! very valued member in my book! what ever you do dont leave us! ;-]) have a good night creaky i'm off to chill out...
@Rotary - cheers buddy, it does take ages to format the replies. i've dropped a hint to the admins that i'd like to see some forum functionality that allows you to do the quotes and stuff via buttons instead of typing it all. i'm not going anyway anytime soon, you keep around too, your help is always needed by moir...
I love you guys. It will get started on that straight away. The only thing i am worried about is the media I use. I have used this type all the time and never had a problem. But thanks. Liverp
