Problems burning over RW DVD'S with info on them

Basically I have a few discs here that have hardly info on them and although I'm new to this stuff I'm pretty sure I should be able to burn over them, like I have done with RW CD'S in the past.

I use an external USB dvd drive and for a while I have had problems getting it to work but I finally have. I convert my files such as movie AVI to DVD files using WIN-AVI converter and this seems to work most of the time when burning through nero express 6.

But this problem has arisen now and I know you'll say go and get new discs but the thing is I used a new blank DVD disc yesterday and it did the same thing it appears to buffer fine but when it goes to burn it sticks on 1% for ages then a message comes up readin "could not perform end of disc-at-once" and it's aborted and it does this every bloody time.

If it helps I've got the report log for why it failed last time if it makes any sense, as I said I'm new to this stuff

1A23-[bold]serial number removed[/bold]

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <DVDRW USB1008UI> Version: 0058 - HA 2 TA 3 - 6.6.0.13
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L200P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 4G120J6 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CRW-4816A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1612 D: CDRom0
ASUS CRW-4816A E: CDRom1
DVDRW USB1008UI G: CDRom17
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785952kB)
Free physical memory: 370MB (379808kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.12.2001
UDF/ISO compilation
21:39:32 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

21:39:32 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

21:39:32 #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

21:39:32 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

21:39:32 #5 Text 0 File Reader.cpp, Line 127
Reader running

21:39:32 #6 Text 0 File Writer.cpp, Line 122
Writer DVDRW USB1008UI running

21:39:32 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

21:39:32 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

21:39:32 #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

21:39:35 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2000895 (444:38.45, 3907MB)

21:39:35 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

21:39:35 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVDRW USB1008UI, Media type: DVD+RW
Disc Manufacturer ID: OPTODISC, Media Type ID: OP1, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

21:39:35 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

21:39:35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2000896 (2000896) = #2000896/444:38.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2000896 blocks [DVDRW USB1008UI]
--------------------------------------------------------------

21:39:35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW USB1008UI] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4097835008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2000896 | lead-out | 1 | 0x41 | 0x00

21:39:36 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

21:39:36 #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

21:39:36 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

21:39:36 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

21:39:36 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:39:36 #21 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: OPTODISC
Media type ID: OP1
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4F 50 54 4F 44 - 49 53 43 4F 50 31 01 39 ...OPTODISCOP1.9
23 00 84 80 68 02 28 00 - 8C 7D 44 02 32 00 8A 78 #...h.(..}D.2..x
58 02 28 24 13 10 00 20 - 10 00 00 00 00 00 00 00 X.($............

21:39:36 #22 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes

21:41:05 #23 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x0B7A0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:05 #24 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x03420200
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:05 #25 Text 0 File Mmc.cpp, Line 19101
Writer-Buffer for DVDRW USB1008UI\H2 T3 reduced to 32768Bytes

21:41:05 #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x03420200
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:05 #27 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
DVDRW USB1008UI\H2 T3

21:41:05 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:41:06 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:41:06 #30 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 3, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:06 #31 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 3, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:06 #32 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x03A378FC
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

21:41:06 #33 CDR -3 File WriterStatus.cpp, Line 167
Recorder function not implemented
DVDRW USB1008UI\H2 T3

21:41:06 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

21:41:06 #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

21:41:06 #36 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 3, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

21:41:06 #37 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 3, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 12:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\Al