Hi, I'm new here and this looked like the right spot to get help. I've searched around the forums and seen people with similar problems... but the solutions I found was not working This is my situation: My girlfriend has her birthday tomorrow, along with other things I wanted to burn some dvd's for her with different things on them. Nero has always worked fine until some month ago when I recieved "Illegal disc" "Could not perform start of Disc-at-once" at the time I did not bother trying to fix it, instead I tried over 7 other burning programs and NONE worked. I began thinking I had a virus or something... but can't find anything. So I re-installed Nero yesterday and wow! a normal CD worked ( I tried to burn a mp3 file and it worked fine) so I was happy... and today when I tried burn a DVD the errors returned. Here is the log Wolf <serial here> Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-06-17 15:25:04 Nero version: 6.0.0.9 Recorder: <_NEC DVD_RW ND-1300A> Version: 1.06 - HA 1 TA 1 - 6.0.0.9 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 3 TA 0 - 6.0.0.9 Adapter driver: <d347prt> HA 3 === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On DiskPeripheral : ST3250823AS 3.01 viamraid Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1022MB (1046960kB) Free physical memory: 555MB (569016kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.5.2006 ISO compilation 12:09:52 #1 Text 0 File Isodoc.cpp, Line 5748 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:09:52 #2 Text 0 File Reader.cpp, Line 118 Reader running 12:09:52 #3 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 12:09:52 #4 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 12:09:52 #5 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2066159 (459:08.59) 12:09:52 #6 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 12:09:52 #7 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 12:09:52 #8 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2066160 (2066160) = #2066160/459:8.60 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2066160 blocks [_NEC DVD_RW ND-1300A ] -------------------------------------------------------------- 12:09:52 #9 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4231802880, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2066160 | lead-out | 1 | 0x00 | 0x41 12:09:52 #10 Phase 24 File dlgbrnst.cpp, Line 1843 Caching of files started 12:09:52 #11 Phase 25 File dlgbrnst.cpp, Line 1843 Caching of files completed 12:09:52 #12 Phase 36 File dlgbrnst.cpp, Line 1843 Burn process started at 2x (2 760 KB/s) 12:09:52 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:09:52 #14 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 25:36,737 (1536737ms) -> OK 12:09:52 #15 Text 0 File DVDR.cpp, Line 1485 Recording mode: Sequential Recording Mode 12:09:52 #16 Text 0 File Mmc.cpp, Line 18724 Set BUFE: JustLink -> ON 12:09:52 #17 Text 0 File DVDR.cpp, Line 1600 Start write address at LBA 0 DVD high compatibility mode: Yes 12:09:52 #18 Text 0 File Cdrdrv.cpp, Line 7906 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:09:52 #19 SCSI -1046 File Cdrdrv.cpp, Line 1205 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1F 0x86 0xF0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 12:09:52 #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1534 Illegal disc 12:09:52 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1534 Could not perform start of Disc-at-once 12:09:52 #22 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:09:52 #23 Phase 38 File dlgbrnst.cpp, Line 1843 Burn process failed at 2x (2 760 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2005-09-14 21:17:44 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-04 07:59:42 (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-08-22 17:31:48 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks for your time
and your nero is out of date, you might consider upgrading to 6.6.0.18, the most stable version of the 6 series
I've used some newbie guide to put my DMA on, I did the steps and now it look like this CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On DiskPeripheral : ST3250823AS 3.01 viamraid Port 2 ID 0 DMA: Off I don't know what the second thing is, but I know that NEC DVD_RW is my only dvd burner. I still get the same error as before though
Hi Wish The generic drives listed as virtual drives so no need to worry about DMA on them. You hard drive looks like it's on a Raid controller - so DMA may not be an issue. Your firmware can use an update - it's a bit behind . The latest is 1.0C. Here's a link: http://forum.rpc1.org/dl_firmware.php?download_id=1517 This should help your drive recogize the Sony's better. The firmware helps the drive with write strategies on media. It's an older drive and hopefully the firmware will do the trick for you. To update the Nero to 6.6.0.18 - here's some links for package 1 & package 2 (recode and vision): http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Try this and let us know how it goes - good, bad or otherwise! Oh and edit out your serial # in your log above - it begins w/ 1A23. Don't need someone else using it. almost forgot - Hey guyrus
Worked! Love you all Thank you so much for this great support. Let's just hope it will work tomorrow to... I'll post in a few days to confirm it's working.
