jsut got some TY 4x -Rs from merit line on monday. have made 10 attempts and 10 coasters. had no problems with the Ty 8x -r. have decrypter set at 4x burn speed. will start writing disc goes up to 4.7x burn for a few seconds then go down to 0x and then error. tried writing at 2x-8x and no luck. any ideas?? thanks
Hi there, What's the Media ID of those DVD-R ? DVDInfoPro can read the media ID off a media ! http://www.dvdinfopro.com Can you provide us a burn log, if you try burning with Nero or VSO CopyToDVD, maybe we can see what's going on. Check your DMA settings, make sure DMA is set on that burner: http://home.comcast.net/~bbmayo/DMA.html http://www.the-predator.com/dell/sec6-5.html#6-5-1
here is the media id Media Information Region information N/A not a DVD-VIDEO Media code/Manufacturer ID TYG01 Format Capacity Blank Disc Free Blocks 412352512 Free Capacity 4.38GB(4.71GB) Book Type DVD-R Media Type DVD-R Manufacturer Rated Speed 4.0x 5540KBps Available Write Descriptor CLV 4.0x 5540KBps Available Write Descriptor CLV 2.0x 2770KBps Write Strategy Speed 4.0x 5540KBps 2x Speed OPC beta 08 2x Speed OPC power 0F 2x Write Strategy field 1 11 87 78 80 2x Write Strategy field 2 88 80 00 00 00 00 4x Speed OPC beta 05 4x Speed OPC power 16 4x Write Strategy field 1 0D 0F 0B 0B 4x Write Strategy field 2 97 08 0F 0B 4x Write Strategy field 3 00 00 00 00 4x Speed OPC beta multi-pulse 05 4x Speed OPC power multi-pulse 1B 4x Write Strategy field 4 13 A8 89 65 4x Write Strategy field 5 B6 89 88 80 00 00 4x Write Strategy field 6 00 00 D0 00 00 Data area starting sector 30000h Linear Density 0.267um/bit Track Density 0.74um/track Number of Layers 1 Complete Media Code 00000000 00 6C 00 00 01 40 C1 FD 9E D8 52 00 02 86 0D 13 .l...@....R..... 00000010 66 78 80 00 03 54 59 47 30 31 00 00 04 00 00 00 fx...TYG01...... 00000020 00 00 00 00 05 88 80 00 00 00 01 00 06 08 0F 11 ................
Hi again, Damn those are nice TY ! Have you tryed a different burning software and try at 2x then 4x ! It can't be the media if they are genuine TY !
i jsut cant figure it out. i ran through my previous 100 8xTYs burning at 4x with but a few coasters. glad they are genuine dics i havent changed anything except the dics. 8x to 4x same version of decrypter and shrink
I had a similar problem,but I found out I was doing too much at the same time(3 different discs)Try just doing the one movie. I also had to flash the firmware in 1 of the burners(slowed the others down.) TY is a good disc,never had any problems with them....usually my error.
i am having no luck at all. i have tried all i can. tried burning at 2x 2.4x 4x 8x i only do 1 thing at a time. have all other programs turned off. i am jsut wasting these crappy discs. my 8x were perfect. getwrite errors still. it always goes past the set burn speed. then dropps to 0x then gives error. they will usually burn 3 or 4% then give errors. it is drivin me crazy.
I 21:23:20 DVD Decrypter Version 3.5.4.0 started! I 21:23:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 21:23:20 Drive D:\ (FAT32) does not support single files > 4 GB I 21:23:20 Initialising SPTI... I 21:23:20 Searching for SCSI / ATAPI devices... I 21:23:20 Found 1 CD-ROM and 1 DVD±RW! I 21:23:20 Operation Started! I 21:23:20 Source File: C:\DVD WORK\BE_COOLSHRUNK.ISO I 21:23:20 Source File Sectors: 2,186,600 (MODE1/2048) I 21:23:20 Source File Size: 4,478,156,800 bytes I 21:23:20 Source File Implementation Identifier: DVD Shrink I 21:23:21 Destination Device: [0:0:0] TSSTcorp CD/DVDW TS-H552B GA02 (E (ATA) I 21:23:21 Destination Media Type: DVD-R (Disc ID: TYG01) (Speeds: 2x, 4x) I 21:23:21 Destination Media Sectors: 2,298,496 I 21:23:21 Write Mode: DVD I 21:23:21 Write Type: SAO I 21:23:21 Write Speed: 4x I 21:23:21 Link Size: Auto I 21:23:21 Test Mode: No I 21:23:21 BURN-Proof: Enabled I 21:23:21 Filling Buffer... I 21:23:21 Writing LeadIn... I 21:24:04 Writing Image... W 21:30:49 Failed to Write Sectors 179584 - 179615 - Logical Block Address out of Range W 21:30:49 Retrying (1 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (2 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (3 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (4 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (5 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (6 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (7 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (8 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (9 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (10 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (11 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (12 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (13 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (14 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (15 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (16 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range W 21:30:49 Retrying (17 of 20)... W 21:30:49 Retry Failed - Logical Block Address out of Range heres what i get from dvdd
