Hi guys, I have purchased 3 A7V600+ boards with AMD Athlon 2600+ processor, 512 MB DDR ram 333MHz. ATI 9200 card. I was working on following settings: CPU Speed: Manual CPU Frequency Multiple: 11.5X CPU External Frequency (MHz): 166/33 But some time I get error for improper settings. So now I have set my setting to CPU Speed: 1150 MHz CPU Frequency Multiple: 11.5 CPU External Frequency (MHz): 100/33 But I don’t know the best settings for above combination. Please tell me the proper setting.
have you checked whether there any jumper settings for the FSB on the Mobo. you may need to set these before the clock speed is detected properly
Also try setting the multiplier to x10 with the frequency at 166 as i belive the 2600 should run at 1.6GHz which is what this config should give you
