Ps3break v1.0 help pls with win7 64bit

Hi all
I bought a ps3break from digitopz.com is v1.0 im trying to upgraded it but i cant.
I put it into the usb and it installs it self but i cant even find it to install it with the right drivers and the program dont find it either. I have windows 7 64bit.
pls help ty all

 

If you are using FLIP to flash your dongle you need to get signed drivers for win7 64bit as those included in the downloads arent signed.

http://bbs.a9vg.com/upfile/get/dd55e953b31f1ddc7605e42ad4e3db46/Flip-libusb-signed-driver.zip

Extract and copy into the usb folder of FLIP

Find dongle in device manager goto properties then click update driver. then point it to the usb folder in the FLIP folder.

 

That link you give me is JP i cant read nothing lol

 

And thats another problem I have. when i put it in the usb it goes to Generic USB Hub

 

Chinese but yeah. Try this link:

http://bbs.a9vg.com/read.php?tid=1569790&fpage=1&toread=1&uid=&page=1

Then scroll down until you see WIN7 X64
Then click the link below which says Flip-libusb-signed-driver.zip

And yup thats the other problem, finding the damn thing in the list
Try right at the top of the device manager list, it there is a section called Atmel or Libusb-win32 devices, it'll be in there.

 

Is not there ; ;
The pc install the drivers it self and show it like a usb hub.
Is there a way i can make this damn win7 ask me what drivers to use ?
ty so much for your help

 

Expand the usb controller list in device manager, is there an unknown usb device listed?
Or check through entire device manager list and see if anything has a yellow warning triangle next to it, then upgrade teh driver to those included in the above file.

If the dongle is there you are looking for something called AT90USB162. If you find this upgrade drivers, it might be under Other Devices in device manager.

Also try pressing and holding the upgrade button before you plug it into your pc, then let go when its in, see if that works.

 

theres none thats the problem, the pc say " your device was installed" then after i go to manage i dont even see it but i know to what hub it went to

 

I got it to go yellow but it dont say the name of it but when i go to install the driver it said the rivers was already installed

 

if you know where it is then just right click and upgrade the drivers.

 

I press the upgrade button and hold it and let go after it was in and i hold after it was in too and nothing

 

It tells me the driver is already installed but is on yellow ;; i hate win7 lol

 

Then uninstall the driver then search for new hardware again.

 

I did that lol, i uninstalled the driver then i try to update the drive and it told me the driver is already installed, I think is bc my pc cant tell what it is, is not even showing the name of the ps3break

 

The one thats selected is the one
i got it to show the yellow mark too but it dont work
The other yellow one is my sata pci to flash xbox 360

 

Have you downlaoded the file I linked and copied the files to the usb folder below?

What happens when you update the driver and tell it to look in c:/program files/atmel/flip/usb ?

 

Yeah I put all those files in it
It say that the "best" driver is already installed

 

Most Ps3 break v1.0 (long one) are PIC chip inside, not an ATMEL chip(short one) which is upgradable and detects AT90USB162.

 

How can I tell what I have?

 

Never mind, I have the short one, mine is 2.2 inch
still not working ; ;