can anybody help with pc connection to the box pvr i have set the box to pc and connected usb cable computer says was unable to install hardware successfully
1) Connect PC & STB with USB Cable 2) Main Menu-> Select �HDD Mode Change PVR�-> Press �0000� on the RCU ( Showed �HDD Mode Change PC� ) 3) In PC a) Showed new Local Disk on the PC ( �F:W� or �E:W� ) b) Copy new Firmware to firmware folder in the Local Disk. 4) Remove the USB Cable (select safely remove in pc on taskbar 1st) 5) Main Menu-> Select �HDD Mode Change PC�-> Press �0000� on the RCU Once �HDD Mode Change PVR�, STB is automatically re-boot. 6) Main Menu-> �Select HDD Interface� ->�Select Upgrade software from HDD� Select �new firmware -> Press �0000� on the RCU
Also make sure you have the Hard disk installed and formatted using the STB format facility. If you don't it won't recognise it.
step 1&2 on your list work but on step 3 a it does not show up on pc it just says your new hardware could not be properly installed
