Ok,I read that and from what I can fiqure I can't see how I rip or burn anything.How can I have Nero and not have any of these files?I used a program which shows your files and it reports I have none.I either have no clue of what I'm reading or there is something weird going on here.Here's what the scan read,please comment on this. LOG0143: ***************************************************************** LOG0144: Starting ASPICHK[1] installer on Wed Nov 29 13:14:12 2006 ASPICHK0438: OS = Windows NT (5.01.2600) UPGRADE0965: File c:\windows\system32\wnaspi32.dll does not exist UPGRADE0369: No existing file to compare, upgrade recommended UPGRADE0965: File c:\windows\system\winaspi.dll does not exist UPGRADE0369: No existing file to compare, upgrade recommended UPGRADE0965: File c:\windows\system32\drivers\aspi32.sys does not exist UPGRADE0369: No existing file to compare, upgrade recommended UPGRADE0965: File c:\windows\system\wowpost.exe does not exist UPGRADE0369: No existing file to compare, upgrade recommended ASPICHK0522: Inconsistent version numbers among components ASPICHK0592: ASPI installation has problems LOG0218: Closing installer log on Wed Nov 29 13:14:12 2006 LOG0219: *****************************************************************
To rip DVDs use RipIt4Me (free off google) and to burn you have Nero Cos Nero has its' own ASPI, different to the system files. I also, do not have ASPI on my PC, yet can burn fine. If you want to install ASPI (might benefit you) then it explains how to use ForceASPI on that website to install it.
Thanks for the reply.It shows how much I think I know but really have no idea about.I thought there had to be ASPI files,you confirm by not having them on your PC there doesn't.Where do I put these files if I try the Force download?
Thank you. If I could ask you one more thing,could you comment on this.I had my Nero error log file read when the burn failed when I tried to burn at 4X.I can only burn at 2X or 1X,it doesn't matter what program it is or what media is used.They said everything looked fine.I'm confused as to how it looks fine yet the burn failed.Does this tend to point towards the burner being bad?
It may point to media or a firmware upgrade. If an old burner, then I'd need to check it's specs and see if it is compatible with the disks you're using. What disks are you using? What model/make is your drive? What firmware version is it? (Run Nero info Tool)
It's a NEC-ND3550A,about 2-3 months old with the latest firmware,v.106.It's done this since new. I've been using Sony and Verbatiums which I think checked out ok with the Nero tool.The Sonys came back as Sony Recording Media 16D1 and the Verbatiums came back as MCC03RG20. I've had this same burning problem with all the media I've ever tried.
I hope this is what your looking for and not what you don't need? Thanks for taking the time on this,I sure appreciate it.When I had this read they mentioned I needed to upgrade,and it has since been done. ********** Nero Recode 2 ********** Version: 2.2.6.11 MIKE Project type: Nero Digital Target size: DVD5 (2282925) 21:12:53 File LangStreamPatcher.cpp, Line 56 Command table patching started... 21:12:53 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: _NEC DVD_RW ND-3550A Number of copies: 1 Write speed: 5540 KB/s Temp folder: D:\RECODED BREAKUP (43608660480 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL NeroDigital profile: Standard Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 21:15:32 File burn_ndigital.cpp, Line 158 NeroDigital: init 21:15:32 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 21:15:33 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2292150 sectors (2298496) 21:15:33 File burn_ndigital.cpp, Line 269 NeroDigital: burning 2292150 sectors (1597015 required) 21:15:33 File burn_ndigital.cpp, Line 301 NeroDigital: Adjusting target size 21:15:33 File burn_ndigital.cpp, Line 343 NeroDigital: beginning 1st-pass operation 21:15:33 File burn_ndigital.cpp, Line 697 NeroDigital: encode THE_BREAK_UP Title 1 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (2, 8, 0, 12) Resizing enabled (720,384) Pixel ratio (1,1) Bitrate: 4000000 bps 21:15:33 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\MICHAEL\LOCALS~1\Temp\\THE_BREAK_UP Title 1a03204.bin 21:15:33 File burn_ndigital.cpp, Line 1192 NeroDigital: building graph Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 21:15:34 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 22:11:23 File burn_ndigital.cpp, Line 1018 graph completed successfully 22:11:23 File burn_ndigital.cpp, Line 391 NeroDigital: finished 1st-pass 22:11:23 File burn_ndigital.cpp, Line 407 NeroDigital: 0 files require 2nd pass 22:11:23 File burn_ndigital.cpp, Line 480 NeroDigital: beginning 2nd-pass operation 22:11:23 File burn_ndigital.cpp, Line 527 NeroDigital: Compiling volume completed successfully 22:11:23 File burn_ndigital.cpp, Line 557 NeroDigital: begin burn operation 22:11:23 File NeroRecorderBase.cpp, Line 1096 Burning 1 files with total size of 2368999112 bytes on hard disk Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.8 Using interface version: 6.6.0.8 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-140C atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3550A E: CDRom0 SAMSUNG CD-ROM SC-140C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523628kB) Free physical memory: 145MB (149040kB) Memory in use : 71 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.11.2006 NeroAPI 10:11:24 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:11:24 PM #2 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-3550A running 10:11:24 PM #3 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 10:11:24 PM #4 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1157263 (257:10.13, 2260MB) 10:11:24 PM #5 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:11:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: _NEC DVD_RW ND-3550A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 10:11:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:11:24 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1157264 (1157264) = #1157264/257:10.14 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1157264 blocks [_NEC DVD_RW ND-3550A] -------------------------------------------------------------- 10:11:24 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2370076672, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1157264 | lead-out | 1 | 0x41 | 0x00 10:11:24 PM #10 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:11:24 PM #11 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 10:11:24 PM #12 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:11:24 PM #13 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 10:11:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:11:24 PM #15 Text 0 File DVDR.cpp, Line 2216 Recording mode: Sequential Recording Mode for Multisession 10:11:24 PM #16 Text 0 File Mmc.cpp, Line 21261 Set BUFE: Buffer underrun protection -> ON 10:11:24 PM #17 Text 0 File DVDR.cpp, Line 2362 Start write address at LBA 0 DVD high compatibility mode: No 10:11:24 PM #18 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:18:25 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05E60000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x10 0x2C 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 10:18:25 PM #20 CDR -1135 File Writer.cpp, Line 311 Write error 10:18:25 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:18:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:18:25 PM #23 Text 0 File DVDR.cpp, Line 2625 EndDAO: Last written address was 1059839 10:18:26 PM #24 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 10:19:55 PM #25 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 6/3/2003 4:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 22:19:59 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 22:19:59 File burn_ndigital.cpp, Line 200 NeroDigital: exit
I can't see anythign wrong with that except the outdated Nero whih you say is now updated. Insall ForceASPI and try to burn again.
Thanks a ton for taking a look at that.If with the Force the same thing happens would you lean towards the burner being bad?
Just for the heck of it I ran Image Burn at 16X in the "test mode." The burner ran right through the ISO file perfectly.Then I tried to burn the file and the error pops up,no burn.Another thing is I can't shut Image Burn off.I can try to exit the program,but the burner just whirls away and Image Burn refuses to shut off.The exact same thing happens in Decrypter.If I want to exit either program,I have to do a hard shutdown of the computer.Does anyone have any thoughts,ideas or comments on this? Please I would love to read some comments.
