I'm based in Dublin on an N*l cable.. I've got 2 s**rview 1 original boxes and one of them has lost a number of channels.. MU*V, S*y Premier,Set***a 1,P*v but to name a few... so i did the usual factory reset a couple of times with strange results.. Firstly I found only 153 programs rather than the usual 171.. And some of these programs were blank screens titled TV 202 or TV 205.. I'm guessing these are my missing channels and are still scrambled.. The strange thing is my other b*x which is the same type and not a clone has all the channels as per usual?? So i'm afraid to do a factory reset on this b*x in case i lose them.. My question/problem is how do I get the channels back on the other B*x.. Any ideas?? thanks in advance folks....
are u scanning from main source and not thru splitters or extension,when u factory reset box power off box for a min then on and autoscan
Yeah i'm scanning from the main sourse not a splitter... tried powering off before reseting too still no joy?
starview 1 are known to be a problen at times u might only be scanning 1-24 tps,u might have to reset /off/on scan a few more times when suddenly 1-36 tps will appear=all channels.
Yeah this happened at first 1-24 tps only got 34 channels and no radio stations... turned on/off again for 1 minute and scanned again 1-36 tps appeared but i'm still missing alot of channels e.g s*y premier/+1, Tc.m, set*nta golf, m*tv and blank screens titled tv 201 or tv 202?? I'm baffled... Thanks for the help anyway.. i'll just keep reseting it and hopefully it'll sort itself out
bad coaxial cable will cause that,my friend had a multi distribution unit in attic feeding 5 tvs poor signal loss,he rewired ang got most back.u can download a channel dump of dublin from eamos library
bad coaxial cable will cause that,my friend had a multi distribution unit in attic feeding 5 tvs poor signal loss,he rewired ang got most back.u can download a channel dump of dublin from eamos library[/quote] Would it just go bad suddenly? It was fine up until yesterday.. seems strange to me. anyway thanks for your help..
Channels have moved freq over the weekend . And it sounds like a low freq signal on a transponder Menu > Factory Setting PIN 0000 OK to delete Turn box off at the back for a minute and turn back on English > Installation Choose N*L Automatic Scan Press OK Channels found Exit Press Menu then 1570 Turn EMU key ON Exit , exit , exit If your still missing them you can try a manual scan , new channel will appear at the end of your list Setanta golf 306.000 Sky Premier + 1 306.000 Tcm 299.00
just did another factory reset and all the channels are back again.. thanks for the help guys/girls and good luck to Celtic tomorrow
