Dear people, i have noticed that recently s/< sports 1 and 3 seem to be to dissapear in the daytime with the message 'No signal' but in the evening and night it comes back on but is freezing a little and also glitching alot.... its a st@rview original i have with v1****media... i noticed its all frequencies with 747000KHz (64QAM) that is doing this.. any ideas why its doing this....ive tryd the usual delete and rescan and reboot but no joy... Thanks in advance
I had a similar problem with a few frequencies recently but eventually found that my cable wasnt tight enough going into my box. When you manouvre the cable around, you see that the screen breaks up so you have to tighten it up as much as you can.
hello, thanks for the idea... just try'd it and no joy unfortunately. i got 2 boxes and im gettin the problem with both... any other ideas?
It may be a problem with your cc but im sure scouser or celtic will be right at the back of this thread with the answers
As Ken mentioned , it could be a cable company problem or the ch@nnels have moved freq's. As Im in Ireland Im not too sure what the freq's are You can try this and see if you get them back working Menu > Factory Setting PIN 0000 OK to delete Turn box off at the back for a minute and turn back on English > Installation Choose Provider etc Automatic Scan Press OK Channels found Exit Press Menu then 1570 Turn EMU key ON Exit , exit , exit Press Menu then 1570 and press the "Set Default Key" , press OK , Exit 3 times and tune into S*Y Sports and it should auto update for you.
hello again, i tryd that out just now celtic and still getting the same problem... im also getting glitching on channels with 731 000 frequences... ie s/<y sports2, MUTV and ppv2... this is just a guess but cud it be heat related??? the eveings are cooler and the channels seem to come back but in the daytinme when its boiling the signals dissapear... this only started whent eh good weather came.... ive got the lastest cryptstar and API ver: 4.00e_E bin file loaded..im in the uk, midlands region so if anybody else is experiencing this problem please let us know... many thanks in advance
Dont know about the heat thing (hasnt stopped raining in Ireland for weeks lol.) Note the frequencies of the channels that are bad, then delete them, do a manual scan on the freqs & see if they come back any better.
try'd that as well mate. it cant find any signals/channels on 747 000 after deletion and manual scanning. but if i do it in the evening later on let say 9-10pm... it will come back on but it comes very glitchy and freezes often...hence the weather/temp theory....any other ideas folks..thanks in advance again
