I have a internal Samsung burner (model number in Subject line) that I made into a external burner. Now I have no problem reading DVD's, nor do I have a problem burning CD and DVD+R. However when I try to burn anything on DVD-R media a message appears on any burning application I use saying "Reset Ocurred", and the burn fails. I wouldn't be posting this unless i haven't hadl any sucess before in the past. I was wondering if anyone had any suggestions or had this problem before in the past.
sounds like you use Nero... ...let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
This is the information of the LOG file Check supported media : Disabled (0) 11.1.2006 Burn DVD Image 12:18:03 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:18:03 PM #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW SH-W162C running 12:18:04 PM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:18:04 PM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286002 (508:00.02, 4464MB) 12:18:04 PM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:18:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 12:18:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:18:04 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286003 (2286003) = #2286003/508:0.3 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286003 blocks [TSSTcorp CD/DVDW SH-W162C] -------------------------------------------------------------- 12:18:04 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681734144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286003 | lead-out | 1 | 0x41 | 0x00 12:18:04 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:18:04 PM #11 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 12:18:04 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:18:04 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:18:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:18:04 PM #15 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 12:18:04 PM #16 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 12:18:04 PM #17 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 12:18:04 PM #18 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:18:25 PM #19 Text 0 File Cdrdrv.cpp, Line 1286 12:18:25.423 - TSSTcorp CD/DVDW SH-W162C\H3 T0 : Queue again later 12:18:28 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03520000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:18:32 PM #21 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09181400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 12:18:32 PM #22 CDR -1114 File Writer.cpp, Line 311 Reset occurred 12:18:32 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:18:32 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:18:33 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 447 12:18:46 PM #26 CDR -1033 File WriterStatus.cpp, Line 167 Drive not ready 12:18:46 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:18:46 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 8/17/2004 11:28:08 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 10:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
not too long ago I use it to burn one DVD-R and the process succeded. I tried using the DVD-R's in Alcohol 120, and Nero, I don't want to waste about 20 good DVD-R's but i feel like that's what it's coming too. Should I just go ahead and use +R disc??? Thanks for yall's help in advance.
just catching up on my replies..i know it's a few months (!) but did you resolve your burning woes yet ?
