seamless branching problem with Wedding Crashers

Discussion in 'DVD / BD-Rebuilder forum' started by lsargent, Jan 23, 2006.

  1. lsargent

    lsargent Member

    Joined:
    Dec 18, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I am having playback problems with my Wedding Crashers (Uncorked). From what I have read, I'm determining that it is a problem with the ILUV sections involved with the overlap of the theatrical and uncorked video and is due to an issue with the ripping process. I had read that CCE SP corrects issues in "no compression" mode from bad source disks. Does anyone think this problem could be solved with a "no compression" run through first.
     
  2. L8ter

    L8ter Guest

    what version of rebuilder are you using the free version does not handle all iluv titles well!

    what kind of playback issue's are they jittery, macro blocked, player does not recognize disk,etc.etc.????

    what is your ripping process??

    I personally had no problem's w/ this title pretty straight forward rip, rebuilder , burn!
     
  3. lsargent

    lsargent Member

    Joined:
    Dec 18, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I have Rebuilder Pro v1.04. My playback issues are as follows, when an extended (uncorked) video segment is about to begin during the main movie, the transition causes a freeze for about 2 to 5 seconds, then catches up for normal playback, skipping over the video that should have been viewed during the freeze. My rip process is as follows: Engage AnyDVD 5.8.1.1, rip with DVD Decrypter to HD. I had actually attempted to encode this movie with CCE SP after having poor ouput results with a couple of extras with Shrink. It's inevitable that quality degredation will occur on extra features, however, I found that both CCE SP, and Nero Recode 2 (my preferred encoding method) both provide negative aspects of video degredation, but in different ways. I was just hoping to see if I ran my original ripped files through CCE SP first with no compression, will this potentially cure the ILUV section playback problems, even if I choose to reauthor and encode later using another program.
     
  4. L8ter

    L8ter Guest

    do you have anydvd or anything else removing extra's this has happened w/ the movie ray before! the estended version was edited dut to the file being processed w/ out extra's what you can do is re-rip and process w/ rebuilder this time manually select the matierial you want removed! instead of telling rebuilder to do movie only or similar!

    as far as reinserting them if I'm correct you have removed the video!
    there is no way to reinsert them other than reprocessing from the original!

    ps does your disk play the audio of the missing video segment's??
     
  5. BlackSol

    BlackSol Member

    Joined:
    Sep 25, 2005
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Why are you using a version that is 2 releases old?

    As if I have to ask...
     

Share This Page