Sectors to large for disk

Discussion in 'DVDR' started by ODMENT, Oct 4, 2005.

  1. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    The amityville horror and the interpreter both have 2,304,321 Sectors and the only amount sectors on the blank disks is 2,295,104 .. This is a new problem.. First time i saw this in a year.. and it will not let me burn..
     
  2. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    is there a way to adjust the sectors?
     
  3. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    And i am using fugi film disks. why are the sectors higher on the disk that i am coping then the blank disk?
     
  4. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    _NEC DVD_RW ND-3500AG 2.18 (ATA)
    Current Profile: DVD+R

    Disc Information:
    Status: Empty
    Erasable: No
    Free Sectors: 2,295,104
    Free Space: 4,700,372,992 bytes
    Free Time: 510:03:29 (MM:SS:FF)
    Supported Write Speeds: 2.4x, 4x, 6x, 8x

    Physical Format Information (ADIP):
    Disc ID: RITEK-R03-02
    Book Type: DVD+R
    Part Version: 1
    Disc Size: 120mm


    This is the info on my blanks but for some reason the sectors on the orgenal is 2,304,395 and it tells me that there is not enough sectors on the blank disk all the other ones i am doing are under the 2,295,104 wich burn no problem just these 3 movies are giving me fits.. amityville horror,the interpreter, and house of D. Is this somthing new they are doing? to prevent back up?
     
  5. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Still Nothing?
     
  6. ODMENT

    ODMENT Member

    Joined:
    Dec 9, 2004
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    I figured it out the size was to high in the shrink pref field it was set custom at 4600 not 4300...
     

Share This Page