Here is the problem. My old DVD burner burnt out. So i got a new one. It's a Lite On LH-20A1P. I enabled the booktype DVD+R to DVD-ROM with their program but still had a problem that the book type feature of Shrink was greyed out. So i decided to upgrade to the newest version of Nero and i am now getting an error message when attempting to burn., What am i doing wrong. Should i go back to the older version? If you can give me any advice to get the burner to work and to get the DVD+R to DVD-ROM please let me know. Here is the error log Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL02 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : Maxtor 6L100P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 1 DMA: Off CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 0 DMA: Off CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4481B D: CDRom0 LITE-ON DVDRW LH-20A1P E: CDRom1 BY2055I YSN761Q I: CDRom2 BY2055I YSN761Q J: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 190MB (195156kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.12.2006 NeroAPI 4:59:30 PM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 4:59:30 PM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 4:59:30 PM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 4:59:30 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:59:30 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 4:59:30 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:59:30 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:59:30 PM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 4:59:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2227759 (495:03.34, 4351MB) 4:59:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 4:59:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:59:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:59:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2227760 (2227760) = #2227760/495:3.35 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227760 blocks [E: LITE-ON DVDRW LH-20A1P] -------------------------------------------------------------- 4:59:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [E: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562452480, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2227760 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2227760 | 0 | 0x00 2227760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:59:31 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:59:31 PM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 4:59:31 PM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 4:59:31 PM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 4:59:31 PM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 4x (5,540 KB/s) 4:59:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:59:31 PM #21 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:59:31 PM #22 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: No 4:59:48 PM #23 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x190a0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4:59:48 PM #24 CDR -1106 File Writer.cpp, Line 299 Power calibration error E: LITE-ON DVDRW LH-20A1P 4:59:48 PM #25 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 4x (5,540 KB/s) 4:59:48 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 4:59:48 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 4:59:49 PM #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:59:52 PM #29 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 4:59:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I looked for a firmware update for your new 20X Lite-On. I didn't find any. I notice your DMA is diabled so you should enable that. Power calibration errors are usually a sign of poor power to your burner, a bad burner, cable connection or bad media. You have a new burner and are using excellent T-Ys so that shouldn't be a problem. Double check all your connections on your new drive and make sure the jumper position is correct. Usually setting it the way the original burner had it's jumper set is what I do. Get the DMA enabled. Do a simulated burn with Nero to check. Power calibration error guide: http://www.dvdplusvideo.com/dvdguide001.html Enable DMA guide: http://www.dvdplusvideo.com/dvdguide005.html I'd like to know more about the media you are using. I think you should try Verbatim +R at some point. I did a Google search with the media ID listed in your log and got this: http://club.cdfreaks.com/showthread.php?t=139535
i changed the dvd burner to the first on the cable and set it to cable select. i have a dell. here is what i got as an error now Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL02 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : Maxtor 6L100P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 1 DMA: Off CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 0 DMA: Off CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1P D: CDRom0 HL-DT-ST RW/DVD GCC-4481B E: CDRom5 BY2055I YSN761Q I: CDRom2 BY2055I YSN761Q J: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 210MB (215488kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.12.2006 NeroAPI 8:12:15 AM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 8:12:15 AM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 8:12:15 AM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 8:12:15 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:12:15 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:12:15 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 8:12:15 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 8:12:15 AM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 8:12:16 AM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2227759 (495:03.34, 4351MB) 8:12:16 AM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 8:12:16 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 8:12:16 AM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:12:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2227760 (2227760) = #2227760/495:3.35 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227760 blocks [D: LITE-ON DVDRW LH-20A1P] -------------------------------------------------------------- 8:12:16 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562452480, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2227760 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2227760 | 0 | 0x00 2227760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:12:16 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:12:16 AM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 8:12:16 AM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 8:12:16 AM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 8:12:16 AM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 4x (5,540 KB/s) 8:12:16 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:12:16 AM #21 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 8:12:16 AM #22 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: No 8:12:33 AM #23 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x09760040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8:12:33 AM #24 CDR -1106 File Writer.cpp, Line 299 Power calibration error D: LITE-ON DVDRW LH-20A1P 8:12:33 AM #25 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 4x (5,540 KB/s) 8:12:33 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 8:12:33 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 8:12:33 AM #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:12:36 AM #29 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 8:12:36 AM #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
never mind i figured it out. But i should have only done one thing at a time to verify what was the problem, but i changed the disk to a new one and i did a DRM force thing from Dell. The old disk i had been using was the same one that kept giving me a power calibration error and the one i used when i was still in PIO. One of theose things worked. Thanks all for your help
i searched google and came across a dell web site that had a small program (which i can not find anymore) to force the burners into DMA. It says that soemtimes on dell computers when you put a new burner in it, it gets stuck in PIO mode and you have to run this small program. It worked like it said. And i did confirm that that was the problem and not the disks. And sorry, i should have said DMA nor DRM
I think I found it. It's called PIOtoDMA.exe Is that what you used? From Dell: http://support.dell.com/support/dow...s=19&l=en&s=dhs&releaseid=r53986&fileid=63977
kewl! I downloaded it from Dell and put it at my site so I have it for everyone who needs it. Man, that Dell site is a pain in the butt.
