Right Lads, I recently had work done to my house.All the ariels were disconeted in the attic. I have a mmds ariel and an analog ariel.I was just using the mmds ariel before this work was done. I might be missing somthing when reconecting the mmds. There is a lead running down from the ariel and joined to the sitting room by a connector.The box in the sitting room is connected properly (all connections are checked)I am recieving no signal.Am I missing somthing ? Should there be anything else in the attic ? it is possible the aril could of been moved but i want to make sure i am not missing anything Now for the analog. To recieve any signal I have to run two power packs in the attic.Ariel in to one power pack >lead running from there to a 2 way power pack > lead running to tv (signal good). It will not run off a singe power pack (no signal). If I plug a second lead for another tv into the second port on the 2 way pack the signal is distorted (lines running though picture). Any ideas for this one.
