The original Philips DVDRW in my Gateway laptop died, I replaced it with a Slimtype DVDRW SOSW-852s. Now, when I attempt to burn files or any data onto a dvdr-r disc, at the very end of burn, I get the following error message "unspecified target error". The drive can read and play DVD's. Am using Nero Express 6. DVD's are TDK DVD-R. See Nero log file below. Any help would be greatly appreciated. 4.10.2007 Burn DVD Image 10:09:27 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:09:27 PM #2 Text 0 File Writer.cpp, Line 122 Writer Slimtype DVDRW SOSW-852S running 10:09:27 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 344358912 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=37:21.69 ( 168144) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Freds Files\Personal\DVD Burn Image Files\DVD Test Burn 1.nrg> 10:09:27 PM #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:11:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 168143 ( 37:21.68, 328MB) 10:11:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:11:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:11:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:11:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 168144 (168144) = #168144/37:21.69 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 168144 blocks [Slimtype DVDRW SOSW-852S] -------------------------------------------------------------- 10:11:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 344358912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 168144 | lead-out | 1 | 0x41 | 0x00 10:11:15 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:11:15 PM #12 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 10:11:15 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:11:15 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 10:11:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:11:15 PM #16 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 10:11:15 PM #17 Text 0 File Mmc.cpp, Line 21627 Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON 10:11:15 PM #18 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 10:11:15 PM #19 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:11:22 PM #20 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06AF0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 10:11:22 PM #21 CDR -400 File Writer.cpp, Line 311 Unspecified target error 10:11:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:11:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:11:22 PM #24 Text 0 File DVDR.cpp, Line 2732 EndDAO: Last written address was -1 10:11:22 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner 1A20-0316-0010-2522-5586-6029 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Slimtype DVDRW SOSW-852S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981232kB) Free physical memory: 459MB (470820kB) Memory in use : 52 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.10.2007 ISO compilation 10:26:53 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:26:53 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:26:53 PM #3 Text 0 File Writer.cpp, Line 122 Writer Slimtype DVDRW SOSW-852S running 10:26:53 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:26:53 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:27:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 103039 ( 22:53.64, 201MB) 10:27:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:27:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:27:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:27:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 103040 (103040) = #103040/22:53.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S] -------------------------------------------------------------- 10:27:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 103040 | lead-out | 1 | 0x41 | 0x00 10:27:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:27:24 PM #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 10:27:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:27:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 10:27:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:27:24 PM #17 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 10:27:24 PM #18 Text 0 File Mmc.cpp, Line 21627 Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON 10:27:24 PM #19 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 10:27:24 PM #20 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:27:32 PM #21 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 10:27:32 PM #22 CDR -400 File Writer.cpp, Line 311 Unspecified target error 10:27:32 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:27:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:27:33 PM #25 Text 0 File DVDR.cpp, Line 2732 EndDAO: Last written address was -1 10:27:33 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner 1A20-0316-0010-2522-5586-6029 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Slimtype DVDRW SOSW-852S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981232kB) Free physical memory: 461MB (472536kB) Memory in use : 51 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.10.2007 ISO compilation 10:28:04 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:28:04 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:28:04 PM #3 Text 0 File Writer.cpp, Line 122 Writer Slimtype DVDRW SOSW-852S running 10:28:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:04 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:28:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 103039 ( 22:53.64, 201MB) 10:28:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:28:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:28:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:28:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 103040 (103040) = #103040/22:53.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S] -------------------------------------------------------------- 10:28:27 PM #11 Text 0 File Burncd.cpp, Line 3825 Can only write at 2x (2,770 KB/s) instead of 3x (4,155 KB/s) to current disc. 10:28:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 103040 | lead-out | 1 | 0x41 | 0x00 10:28:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:28:27 PM #14 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 10:28:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:28:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 10:28:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:28:28 PM #18 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 10:28:28 PM #19 Text 0 File Mmc.cpp, Line 21627 Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON 10:28:28 PM #20 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 10:28:28 PM #21 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:28:28 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBE0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 10:28:28 PM #23 CDR -400 File Writer.cpp, Line 311 Unspecified target error 10:28:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:28:28 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:28:29 PM #26 Text 0 File DVDR.cpp, Line 2732 EndDAO: Last written address was -1 10:28:29 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner 1A20-0316-0010-2522-5586-6029 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.15 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Slimtype DVDRW SOSW-852S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981232kB) Free physical memory: 545MB (558828kB) Memory in use : 43 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.10.2007 ISO compilation 10:28:53 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:28:53 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:28:53 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:53 PM #4 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:28:53 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:28:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 103039 ( 22:53.64, 201MB) 10:28:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:28:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:28:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:28:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 103040 (103040) = #103040/22:53.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Image Recorder] -------------------------------------------------------------- 10:29:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 103040 | lead-out | 1 | 0x41 | 0x00 10:29:14 PM #12 Phase 65 File dlgbrnst.cpp, Line 1832 Burn process started 10:29:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:29:55 PM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 103040 (19280h), lenght 0 blocks 10:29:55 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:29:55 PM #16 Phase 66 File dlgbrnst.cpp, Line 1832 Burn process completed successfully Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner 1A20-0316-0010-2522-5586-6029 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Slimtype DVDRW SOSW-852S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981232kB) Free physical memory: 600MB (615080kB) Memory in use : 37 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.10.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 10:09:24 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:09:24 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:09:24 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:09:24 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:09:24 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:09:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1582207 (351:36.07, 3090MB) 10:09:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:09:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:09:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:09:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder] -------------------------------------------------------------- 10:09:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1582208 | lead-out | 1 | 0x41 | 0x00 10:09:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:09:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:17:16 PM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks 10:17:16 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:17:17 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:17:21 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:17:21 PM #2 Text 0 File Writer.cpp, Line 122 Writer Slimtype DVDRW SOSW-852S running 10:17:21 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg> 10:17:21 PM #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:18:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1582207 (351:36.07, 3090MB) 10:18:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:18:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:18:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc for simulation. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:18:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S] -------------------------------------------------------------- 10:18:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1582208 | lead-out | 1 | 0x41 | 0x00 10:18:22 PM #11 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 2x (2,770 KB/s) 10:18:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:18:22 PM #13 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 10:18:22 PM #14 Text 0 File Mmc.cpp, Line 21627 Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON 10:18:22 PM #15 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 10:18:22 PM #16 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:18:27 PM #17 Text 0 File Cdrdrv.cpp, Line 1288 22:18:27.468 - Slimtype DVDRW SOSW-852S\H1 T0 : Queue again later 10:37:56 PM #18 Text 0 File WriterStatus.cpp, Line 116 <Slimtype DVDRW SOSW-852S > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks 10:37:56 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:37:56 PM #20 Text 0 File DVDR.cpp, Line 2732 EndDAO: Last written address was 1582207 10:38:39 PM #21 Phase 33 File dlgbrnst.cpp, Line 1832 Simulation completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner 1A20-0316-0010-2522-5586-6029 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Slimtype DVDRW SOSW-852S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981232kB) Free physical memory: 141MB (145052kB) Memory in use : 85 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.10.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 10:40:25 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:40:25 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:40:25 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:40:25 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:40:25 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:40:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1582207 (351:36.07, 3090MB) 10:40:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:40:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:40:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:40:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder] -------------------------------------------------------------- 10:40:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1582208 | lead-out | 1 | 0x41 | 0x00 10:40:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:40:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:48:20 PM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks 10:48:20 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:48:20 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:48:24 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:48:24 PM #2 Text 0 File Writer.cpp, Line 122 Writer Slimtype DVDRW SOSW-852S running 10:48:25 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg> 10:48:25 PM #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:48:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1582207 (351:36.07, 3090MB) 10:48:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 10:48:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:48:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:48:59 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S] -------------------------------------------------------------- 10:48:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1582208 | lead-out | 1 | 0x41 | 0x00 10:49:00 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 10:49:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:49:00 PM #13 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 10:49:00 PM #14 Text 0 File Mmc.cpp, Line 21627 Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON 10:49:00 PM #15 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 10:49:00 PM #16 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:49:04 PM #17 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x27 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x27 0x00 10:49:04 PM #18 CDR -400 File Writer.cpp, Line 311 Unspecified target error 10:49:04 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:49:05 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:49:05 PM #21 Text 0 File DVDR.cpp, Line 2732 EndDAO: Last written address was -1 10:49:05 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Is the SOSW-852s a OEM model? The TDK are CMC crap. See link You need better blanks like Brand Ritek, Verbatims. http://www.videohelp.com/dvdmedia?dvdmediadvdridsearch=CMC MAG. AM3
Can't believe it, I've struggled with with this problem for two weeks. Took your suggestion and tried another brand of disc (Quentin, just happen to have one laying around) and the burn was successful. In the past, I burned hundreds TDK DVDs with my old Philips DVDRW. Never would have thought that they wouldn't work with the new SOSW-852s burner. Thanks so much for the suggestion 56delray
Sorry I had to bug out and I did not finish the post. TDK's can be good or bad it is the media code that tell the story. That is why it is recomended to buy only branded media (aka. the name on the box is the same as the maker). Here is a list of 16x TDK's. Some are great and some are crap! http://www.videohelp.com/dvdmedia?d...rder=Name&hits=50&search=Search+or+List+Media To finish the last post. CDRALW2K is the Roxio software driver. It may cause trouble with Nero InCD. Run this zapper to get rid of it. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml You should edit your serial number from Nero logs (ex 1A20-****-****-****-****-****). You should update to the stable version of Nero 6. Nero 6.6.0.18 http://www.filehippo.com/download_nero_burning_rom/tech/?539
