Some ISOs only play the 360 logo

Hey guys, I've been able to get a few ISO up and running on my flashed Lite0On with ImageBurn.

However I've got two that I've tried that come back with this result:

http://www.youtube.com/watch?v=XAVl8MwmhL8

 

if you have had good burns and know that the flash is good, i would say that they are either out of region or you have a bad burn, did you use the dvd file? if not make sure you set imageburn with the correct layer break, also i would almost bet you are using memorex, if that be the case try some good media.

 

or the firmware on the drive needs to be updated,,what games are they?

 

Red Dead, and Star Wars Force Unleashed II

 

you are not providing enough information, who flashed the drive what firmware was put on it, what kind of disc are you using, what region are you in, what region are the games, what format, did you set the layer break correctly, all these questions must be answered in order to give you a solution.

 

Sorry guys, here's the 411

The drive was flashed by a friend and I believe he put firmware version 1.51 onto my Lite-On drive.

I am in Region 1 (Canada/US) and can't swear that I know what region the ISOs are, but thought they were 'Region free'.

I've been burning my ISOs on the Verbatim DVD-Rdl discs, and the layer break in my ImageBurn has been the same the whole time. Its worked perfectly for a couple other burns I've done.

The ISOs didn't have DVD files with them (the first time I burned them) so I made one with that ABGX Program and tried a reburn (non-patched) and no luck.

 

there is your answer, thats all that was needed was a little more information, the firmware on your drive does not support the games, you would have to update the firmware or use activate iso disc in order to play them, hope that helps.

 

Thanks man, gonna have to look up ACTIVE ISO.

I had to go to a casual friends place to get the first flash done as I don't have the thing and the USB-to-Laptop thing wasn't working for me.

Should it go into B mode easier now that it's flashed?

 

yes with that firmware it will go in very easy, just do the tray half open and read should work for you.

 

ha ha ha that's awesome.

Any idea what the latest firmware version I should keep my eye open for?

And stay with JungleFlasher?

 

i would do 1.61 so you can do lt+ when it comes out and not have to cut traces