I am trying to install coolrunner and I managed to burn one of the resistors. The one I am referring to is the one right below the cpu_pll_bypass picture found here (the first picture mentioned) http://img11.imageshack.us/img11/6143/regfix07.jpg At first I just connected the bottom end of the resistor with the alternate point and I managed to boot up the box ok, but then it was giving me 3 rrod. So I took it apart and tried to tidy up the soldering and now I can get it to boot up again, but now get 2 rrod (left side, dont know secondary code). I think I can fix this thing if I knew what size resistor that was. Can somebody please figure it out for me so I can replace it? EDIT: Secondary code is 0011 (E05) CPU overheating
If you look at the underside can you see the resistor? If so, they are color coded. Get the color order (Red, Brown, Red = 2100 Ohms or 2.1 KiloOhms). I used this site (http://www.csgnetwork.com/resistcolcalc.html) when I was gathering the stuff to build a Liteon flash tool a couple years ago. Once you know the resistor size just go to Radio Shack and pick some up. Hope this helps!
Mnemonic Color Multiplier Bad Black 0 Boys Brown 1 Rape Red 2 Our Orange 3 Young Yellow 4 Girls Green 5 But Blue 6 Violet Violet 7 Gives Grey 8 Willingly White 9 Last band is % +- Silver 10% Gold 5% It's called a breadboard. Oops formatting is wacko
