Star Wars Battlefront 2 HELP!!!!!!

Discussion in 'PS2 - DVD backup discussion' started by longley23, Oct 30, 2005.

  1. dwarrior

    dwarrior Guest

    To the people who got the game running:
    is it possible to play the game in Lan (2 ps2's hooked to eachother), just like in SW:B?
    If so, do you need to do the dnas patch for that to work?
     
  2. smendes

    smendes Member

    Joined:
    Dec 6, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Help me!!!!

    I don't understand
    I dl star wars battlefront 2 by solops2.com and with my ps2 slim v12 and my magic swap 3.6, the game tell me "insert a valid ps2 disk".
    Some users sayed it doesn't work with swap magic but i want this game!!!
    Please what i have to do for it work or what version of this game i have to download.

    please help me!!!!
     
  3. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    1. Q. How do I burn PS2 games?
    A. Use DVD Decrypter. Guide: http://www.angelfire.com/games6/easytutorial/dvddec/dvddec.html Burn at 4x on an 8x DVD-R.

    2. Q. Does the type of media I use matter?
    A. YES: http://forums.afterdawn.com/thread_view.cfm/3/240341
    If you're too lazy to read, use Taiyo Yuden, Verbatim, Ritek, Sony, TDK, Maxell, Sony or Phillips DVD-R's. Avoid Memorex, Staples, Imation, Dynex, Princo, Bulqpaq, etc.

    7. Q. What do I need to use Swap Magic?
    A. With Slim PS2 v.12-14
    Flip top: http://www.chipzone.com/installation/playstation2/fliptop-v12/pag...
    Magickeys (also referred to as slide tool, slim tool or, magic switch): http://magickeys.net/
    or tape and tissue mod: From Pretense: If the fliptop doesn't work, just give up on it and do a tape and tissue mod. Open up your case again and tape the back sensor (toward the upper left and beneath the hinge part of the lid) with duct tape or even regular Scotch tape (I use several layers to be on the safe side), put the case back together, and stuff a small ball of tissue into the hole for the front sensor (lower right just above the power button).

     
  4. kingmanor

    kingmanor Member

    Joined:
    Dec 8, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    ok i'm having a weird problem. I downloaded the PAL solops2 version, followed all the directions for converting to NTSC, patched the DNAS, burned on a good sony dvd+r. I have swapmagic 3.6 on a v7 ps2.

    the game plays fine, but if my network adapter is plugged in before booting, it locks up on a black screen during boot. if i plug the network adapter in after boot, the game wont recognize it. any ideas? I really wanna play this online
     
  5. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    Never heard that one before. Did you use PAL2NTSC patcher with Y-fix or Adrenaline patcher? Whichever one you tried, try the other one.

    37. Q. I downloaded a PAL game, how do I convert it to NTSC?
    A. Use Adrenaline patcher if it's an EA game: http://www.megagames.com/ps2/ps2_utils_files.shtml#ADRenalin Patcher Note: I've been told this works for non EA games as well. The screen won't be perfectly centered, unless you have a modchip that forces video mode.
    Or patch with PAL2NTSC patcher with Y fix for non EA games: http://forums.afterdawn.com/thread_view.cfm/121718
     
  6. kingmanor

    kingmanor Member

    Joined:
    Dec 8, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    i didn't use either of those. I just followed the directions on page 7 of this thread. My system file says:

    BOOT2 = cdrom0:\SWBFRNT2.ELF;1
    VER = 1.01
    VMODE = NTSC

    the game plays 100% fine on my NTSC playstation. but it wont boot if my network adapter is plugged in.
     
  7. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    I would try patching it with one of those. The screen won't be perfectly centered, but you might be able to play it online. I have very little info on how changing the video format affects you being able to play the game online. Maybe your network adapter is defective, does it work for other games?
     
  8. nexusboy

    nexusboy Member

    Joined:
    Dec 10, 2005
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Thanks to mallymmx - you are are hero

    I followed your advice and after reading the complete thread - got it working no problem on PAL with slim PS2.

    Thanks once again.

    I am a newbie and would like to thank everyone for the input as its taken me a few days reading etc of all posts and now have a working game.

    I managed to get two coasters so far - 1st attempt at battlefront 2 and then Fifa 06 - I wanted to back up my own original game - it loads initially but freezes then - any advice would be helpfull.


     
  9. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    Just follow the advice I posted on this page already. Use good media. Burn with DVD Decrypter. There isn't much more to it. Are you booting games with Swap Magic or a modchip?
     
  10. bmcoach

    bmcoach Member

    Joined:
    Nov 28, 2005
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    My back-up works perfect. I simply created a new ISO-file with gnies rebuilding tool and burned it with Nero(UDF)at 4x. So simple as that. It's a PAl-version.
     
  11. Berge

    Berge Member

    Joined:
    Jan 11, 2005
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    16
    Thanks guys! reading this forum I got my battlefront2 backup to play online last night! I also was able to get it to play from my Hard Drive. yeah! However, it won't do both.

    It seems when I have the hard drive installed, I can't use the adaptor to play online. Does anyone know why that may be? I've heard of tons of people playing online with HDA/HDloader. What are some possibilites of why I can't play game online while using the hdAdvance?

    Thanks in advance,
     
  12. soulman10

    soulman10 Member

    Joined:
    Dec 29, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Hey so were u guys able to work battlefront 2 with swap magic 2.0, because im having the same problem burning it it is not recognized by the system. ive tried diff types of CD's and software to burn it but nothing seems to work. Would you guys mind explaining to me on newbie terms how you got it to read on the swap magic 2.0 version for PS2. Thanks alot u guys, and good luck if u havnt cracked it yet.
     
  13. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    You could either try rebuilding with Expert or Using DVD Loader or Zone Loader.

    11. Q. How Do I rebuild games?
    A. With Nero and Isobuster (works as long as no single file is over 2 GB's): http://forums.afterdawn.com/thread_view.cfm/197949
    With CD/DVDGen: http://forums.afterdawn.com/thread_view.cfm/210515
    With Expert (Gnie's new rebuilding tool):
    Gnie's PS2 Auto Rebuilder Tool Download (Thanks to 3DLuis):
    http://www.alucard.cc/ps2/ExPERT_v1.03.rar
    Instructions to Gnie's Tool ExPERT:
    From Anthony 05:
    Download it and then follow these instrcutions and it will work.

    1. select Shrinker_ps2_psp_CdDvd5_iso.epi on the plugins list.
    2. Select the iso.
    3. Click extract LBA
    4. Click extract file
    5. Click rebuild file
    6. Click rebuild lba.

    Make sure you do it in that order.

    This worked for me when every other way failed.
    It is very easy to do so even the noobies should be able to do it.
    Keep in mind im backing up the PAL version, but if your having trouble backing up with NTSC then i dont see a problem trying.
    Good luck.

    12. Q. I have Swap Magic 2.0 and game X won't work, what do I do?
    A. Check here to see if there's a fix: http://swapmagicfix.com

    Q. Where can I find CD Loader, DVD Loader, Zone Loader, or Cogswap Loader?
    A. http://swapmagicfix.com/
     
  14. Amit0

    Amit0 Member

    Joined:
    Jan 4, 2006
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    ok i am trying this gnie method right now as everything else has not worked for me so far! I hope this works
     
  15. Amit0

    Amit0 Member

    Joined:
    Jan 4, 2006
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    I tried the gneis method and i get as far as the first loading screen then it freezes this has happened with all the methods that i have tried! any help would be nice!
     
  16. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    What kind of media are you using?
     
  17. Amit0

    Amit0 Member

    Joined:
    Jan 4, 2006
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    im using quite expensive imation dvd-r
     
  18. Tokijin

    Tokijin Active member

    Joined:
    Sep 9, 2005
    Messages:
    5,840
    Likes Received:
    0
    Trophy Points:
    96
    There's your problem right there. Imation is awful. Try getting some good media like Taiyo Yuden or Verbatim's from http://www.supermediastore.com
     
    Last edited: Jan 6, 2006
  19. Amit0

    Amit0 Member

    Joined:
    Jan 4, 2006
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    oh right thanks for that info. I live in the UK so i will probably go out and buy some better dvd-rs. Cheers
     
  20. paddymail

    paddymail Regular member

    Joined:
    Apr 4, 2005
    Messages:
    1,813
    Likes Received:
    0
    Trophy Points:
    46

Share This Page