just helped a friend bring his starview 1 back to life after not using for a while ,put the most recent firmware on it scanned ex c,w in my area worked fine sound and picture, took to his house which is TW area scaned and got channels but no sound, just wondering if anyone has experienced the same thing on T/W. THANKS
firstly check that your scart is pushed fully in to both TV and starview check that the volume is turned on... on the starview as well as your TV is it on mute on the remote?..... if all that fails try this.. its slow but you can try it on a couple of channels and see if it works: Sound Problems To get back sound on e4 sky1 ect just select the channel in question press menu, select installation, select manual scan, click ok on down frequency. It'll now scan for channels when its finished exit back to normal tv viewing screen go to the end of your channel listing and the desired channel will be there with sound. This can be done on any channel with no sound by just selecting that channel following the instructions above. Hope this helps
