Hi I have a starview box 2 years would it be worthwhile updateing the software or just changeing the numbers as needed Ed in Dublin 17
Yesterday the codes changed 3 times in an hour , it would be worth your while updating as this is gonna happen all the time
Thanks Celtic I also have the box2 working perfectly !! But I dont know how to update the starwiew 1 any ideas or sujestions please if I update the starview 2 will it update itself when the codes change
Press Menu > System Information and tell us what the API is please Starvi*w 1 and 2 use different firmware Starvi*w 1 You will need to know if you have a clone or genuine Count the vents on top 18x7 = Clone 25x7 = Genuine 13x7 = 1st Generation Also looking from the front Scart to the left = Clone Scart to the right = Genuine Also you can go here to see some pics http://www.freewebs.com/dooby2oon You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link. You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder. You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder. You will need version 4.50 firmware for THE B0X found in "THE B0X" firmware folder.
Ok if its a clone it probally has the normal 2.57 on it and if you update it with 2.57_FIXED , it will auto roll the codes for you You will need a null modem cable DB9F to DB9F. Null Modem Cable http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable. USB Adapter info http://www.maplin.co.uk/Module.aspx...t10&doy=search&MenuName=USB to Serial Adaptor These two cable links are only for reference as they can be purchased alot cheaper on fleabay.
Hi celtic I did the update and rescanned the starview 1 when it finnished scanning it said 33 channels found when I turned the emu all channels where there I checked system imformation it showes 257e-E is it a hit or a miss
Ok try do another auto scan , sometimes it picks up 33 channels , you might have to do auto scan 2 or 3 times to get ALL channels If that fails try this method below Menu > Factory Setting PIN 0000 OK to delete Turn box off at the back for a minute and turn back on English > Installation Choose Provider etc Automatic Scan Press OK 176 Channels found Exit Press Menu then 1570 Turn EMU key ON Exit , exit , exit
Hi Celtic did the factory reset as per your instructions 171 chanels found 3 times same 171 chanels how will I know if the update worked or not.
, Ok so you have all your channels up and running now ? To test if the auto roll works Press Menu then 1570 and in Nagravision change the numbers in 00 (e.g. 12 34 56 78 90 00 12) and press OK to store , Exit back , and then press "Set Default Key" Exit back and tune into S*Y Sports and let it update the codes
Thank you Celtic everything is working fine updateing as well. you are doing a great job for all us novices.
