hi i got a st*rview 2 box today and tryin to set it up its scans the channels and finds 128 of them no problem but wen i go to put in the 1570 code for the menu it doesnt work its APIver 4.54e boot ver 7.00 22 oct 2007 on ntl in waterford to any help would be appricated
go to this link http://eko.4shared.com/ and download the firmware and loader. go to folder for THe BOX then do below from scouser You will need a null modem cable DB9F to DB9F. Null modem info http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable. USB Adapter info http://www.maplin.co.uk/Module.aspx?Modu...dapter&doy=29m1 These two cable links are only for reference as they can be purchased alot cheaper on fleabay. Updating Firmware Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY. (The Starview does not need to be connected to TV to update it with GTROM) Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC. Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC
