when i go to the installation page Chor**s is not listed under cable network - i have tried an autoscan on the ones listed NTL, EX C&W, OM, TW but no joy
Ok when you go installation , go into manual scan and try scan on each freq below 323.000 338.000 346.000 354.000 362.000 370.000 385.000 393.000 409.000 417.000 442.000 450.000 458.000
Press Menu then OK for Installation Go down to Manual Scan Type in 444.000 in "Down Freq" Symbol Rate is 6875 Network Scan "Enable" and Press OK to scan
thanks celtic71 that worked - i have now saved 73 channels but i cant see them. when i select a channel no picture is displayed but if i press info the channel information is displayed. the API ver is shown as 4.00_E 7.June.2007
Press Menu then 1570 Turn EMU key ON Exit , exit , exit You will also need to update your b0x if you have "THE B0X" and 4.00 installed All firmware/loader can be found in the link at the end of my post marked Eamos Library. You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link. You will need version 4.50 firmware for THE B0X found in "THE B0X" firmware folder. And please download the Starvi*w PDF guide,(this will give you step by step instructions on how to do everything.This can be found in the Starvi*w Documentation folder in the link.
