starview 2 the box cuttin out

Hi i have a starview 2 receiver which cuts out on me sometimes the screen goes green then the box shuts down and starts back up again or it freezes then restarts or just restarts can anyone help please

 

I CAN ONLY GET 6 CHANNELS ON MY STARVIEW BOX CAN ANY ONE HELP

 

are only 6 chs viewable,or u can only get 6 chs when scanned ?
is ur emu on ? menu 1570 key emu to on exit 3 times

 

Press Menu > System Information and tell us what the API is please

 

Mine does exactly the same one minute it's working the next it'll cut off and reboot. Your API isn't 4.54e_E is it ?

 

hi no my api is 4.51e_E my issue happens probably about 3 times a week however it can happen say 3 times continusly more annoying than anything but makes me concerned that it will damage my box

 

Are you in the UK or Ireland ?

 

i am in the uk

 

4.51 is the most stable firmware for THE B0X in the UK , you could try flash it again to see if that helps or do a factory setting

All firmware/loader can be found in the link at the end of my post marked Eamos Library.


Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on
English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

 

have done factory settings twice on my box but i have bought another box and put same (4.51e) on it and that does exactly the same

 

The 4.51 firmware you are using might be corrupt

Where did you download it from ?

 

i was advised and given the link by someone on this site for the firmware i got it from eko.4shared.com

 

Ok try this

Delete the 4.51 file from your PC

Go here and download it
http://eko.4shared.com/account/file...H20070709_451eE_api.html?sId=YJ96YW4Vtds9XOMD

Press Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

Then connect the b0x to your PC and flash it again

Wait until you see the DOWNLOAD COMPLETE pop up on your PC before removing the NULL MODEM CABLE. The Starvi*w will then reboot

Disconnect from PC and connect back up to the TV

English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

 

this is the exact same file i downloaded and used on both boxes will this make a difference?

 

You can try it as you might have downloaded it and it could be corrupt , dont forget to delete the one you have from your PC first , then download it again

 

downloaded that file now going to download gtrom loader but ther is 2 different ones i think file called gtrom v4.00 and then another file called v403_051005. which one should i use?

 

Sorry for the dealy

Yes the GT ROM Loader is the one you need

GTRom_v4.00.exe


http://eko.4shared.com/account/file/28186580/30654434/GTRom_v400.html?sId=Chl39NcaJR8IEN13

 

hi i to have the same problem as above the box just cuts out and restarts again i am on ch**us cable in cork ireland and the firmware on it is 4.50e i have done other boxes with the same software and they worked fine its just this on so i am goin to delete the software on the box and load new software all i want to no is what firmware and software i should use thank you

 

you could give the 454eE a go and see if it helps you will hav e to load the 452 and 453 first do.

 

hi thanks for the reply. so will i delete 450 and then install 452 453 454 one by one onto the box