Starview 3... 0 programs found GT Rom Super 8.02e

Hi,

I have updated my firmware using GTRom_Super_8.02e i scan the channels on ntl and 0 programs found message appears i have made sure EMU is switched on.

Please help

Phill

 

Are you scanning from the main feed? (no splitters etc)
Make sure the coaxial cable is in cable input at the back of the b0x.

 

Hi all,can anyone help me please,i have tried to download the latest firmware for the box super but when i press the download button nothing happens,i am using a null serial port lead but dont really understand how the ports are supposed to be the same(im not really very good with computers)would appreciate it if somebody could give me idiot proof instructions to get my box going again or i think my family may well kill me quite soon,thanks in advance.

 

Have a look here;
http://www.freewebs.com/boxsuper/

 

DESB,thanks for that,can you tell me what state the box has to be in when downloading the firmware ie on or off, if it has to be on does this mean in standby only or fully on?

 

Standby ...Ie The clock showing!!

 

DESB,have now tried it on com ports 1 to 4 and it still wont download,any more things that i can try mate?

 

Try this:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected

If you need drivers go here

http://www.gilsson.com/usb_drivers_download.htm

Follow my advice to step 7. Locate your USB Adapter (port *)

Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.

 

I have tried this des still to no avail,can you tell me if the com port is in use can it be used for downloading?

 

yes once the correct port is used, its trial and error, keep trying different ports until one works for you!!

 

The firmware download box only gives me the option of com ports 1 to 4 i have tried them all and none of them will allow the download,do you think that my null lead could be faulty.

 

can you get hold of a Null modem cable in maplins and try that?

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

 

Really getting problems now the firmware box where it shows com ports 1 to 4 is now coming up with an error box saying:cannot open serial port
last error:the system cannot find the file specified.Im about ready to throw the lot in the bin lol.

 

quick question about the cable recievers!

i have a SV3 and my dad has a eurovox ex5000 is it bad practice to keep them lugged in via the aerial 24/7??

 

hi i've got a problem don't know how this happened BUT when i go into PARENTAL CONTROL,NAGRAVISION THEN THE SERVICE PROVIDERS well mines blank well not blank it's just a red bar oh and by the way i've got no channels either can anyone help PLEASE

 

Try This - Menu 1570 back into Cas System Menu and press Set Default Key, exit out and then let it update (if you have the latest fix on) and go back in and it should be there.

 

Presume you are in Ireland? not really.

 

not in ireland im in liverpool, what i mean is should i take them out every so often an put the cable box back in!!

 

Why are you referring to ariel then? The best thing to do is to have the subbed box in as well as the other box's - all three off a good quality splitter, (depending on signal level, you may need a signal booster to do this, but I doubt it) that way your supplier is reading that you have the subbed box in place via the talkback feature. But a lot of people don't bother, that is my advice though, will avoid any suspicions.