StarView 3 - the BOX Super - 0% Update

Hi guys, hoping you can help. I have a starview 3, box super with API version 8.0 (June 2008) on the box. its picking up 172 channels, i have turned EMU to on and exit to premier channel and i am getting a "data s being updated 0%" but it does not move off the 0% - seems t0 be stuck on that, any thoughts?

Thanks
In Dublin on N*L - cheers

 

try discovery channel.

 

Trying that now - that worked, the 0% never went to 100% but the its works..thanks, owe you a pint!

Do I need to do anything else or is that it -i.e. what happens when I turn off tv/box at the socket?

Thanks

 

Turned it off and back on and all good, thanks for the help...

Quick Q - should I be turning it on/off at the socket or to hold the channels do I need to keep it on standby all the time?

 

Cactikid, just checked and notice that of the 172 channels only 130 came thru so no RTE, Tv 3 etc .....re-scan or what do you think?

 

I'm on n** dublin and i only get about 139 channels, you could try a manual scan on the frequency for those channels your missing which on mine is 339.000, might bring them back.

Also as I see cactikid has mentioned I flashed mine to sw 7.09 it had got 8.00 on before flash.

 

normally u use v.7.09 for irl.so if u factory reset then reflash with 7.09 and emu to on.
do not scan thru splitters as u will lose channels.

 

Thanks...a pal of mine is also in Dub and using api 8.0 and the box came with 8.0API already loaded on it - would it be worth re-scanning or should I definately be using 7.09???

Getting 172 channels with the scan (incl radio) but only 130 coming up.....?

So question is API 8.0 or API 7.09?

 

i changed mine to 7.09 cause my box kept rebooting, but a friend of mine and a few others i know are still using 8.00 and no probs so i think its up to yourself, mine also came with 8.00 on it.
maybe try the scan on the frequency sure you can always reflash later.

 

Thanks anto, good advice
Will give it another scan tomorrow evening and also will try the manual scan to see if that works.otherwise will go for the 7.09 version...


thanks for the help again.
C

 

manual scan on 339.000 for those stations your missing, hope it works and let us know how you get on

 

hi guys, did a scan on 339 but nothing came up, still missing the rte, network 2, tv3 etc....

Do I need to make any other changes or do you recommend I flash my box from 8.0 to 7.09?

Thanks

 

manual scan on 339.500 & you should pick them up.

 

Thanks Noel, will do that later this evening. There are 4/5 options in the manual scan menu, do I only need to change frequency or do I also need to adjust other settings?
Thanks
C

 

When you go into manual scan, at the top you`ll see the down freq.
input 339500. symbol rate should be 6887Ksps.
Go down to network scan & switch from disable to enable > press ok & it should then scan & pick the channels up.

Make sure you`re scanning on n*l.

 

Hi, just got my new starview3 and having slight teething probs.....in scotland on virgin......it scans channels using the tw choice but cant get any channels subscription etc as it sits with the 0% data uploading an nothin happens.....any ideas guys.
Is there a setting to choose virgin rather than tw or ntl(which doesnt work)????
Any help is greatfully appreciated

 

Press menu > 1570 & see if you can access the cas menu. If so, turn the "key emu" on.
Go to "set default key" press ok & exit to s*y sports & let it update.

 

Hi Noelyf,
I have done this several times but still sits with 0% update. I have checked firmware etc its 7.09 so its uptodate....just puzzled as to see if there is a prob of using the TW channel search as there is no virgin in the choices.

 

Try a scan on a different provider from the main feed (no splitters etc) then set default key again.

 

only prob i have there is that i need splitter as broadband on virgin aswell