starview Auto update

Hi
I have starview Api ver: 400e_E boot ver: 7.0, its usally does auto update but this time it did the auto update but i could not view any channel part from the normal 1-5 can any one help me plez I have done factory reset but its still no luck!!!?????
thanx

 

Looks like you have a genuine SV, so get the CryptStar-v1.4 firmware from the eko link at the end of my post. Flash your box with that, it's the latest autoroll firmware for genuine SV. You'll find it in the StarView / Firmware directory.

 

Hi I am so sorry to be dum but can u tell me bit more in details plezz i have downloaded that in to my pc but from here can u take me through plezzzzz seems to me there is a problem to download it to my sv.

Thanx

 

use a null modem cable to flash your receiver

do the following m8

GMRom loader v4.00

COM SETTING
Serial Port - COM1
Baud Rate - 115200

STB Settting
STB Model - (leave this as it shows on the screen)donot add anying here , it should a set of numbers , pickedup from your receiver
Bin File - CryptStar-v1.4-core400.bin

FILE TYPE - App File Only

then click on the Download button

when it has completed downloading to you receiver , the receiver turns off & back on by itself , then you are ready to go

 

Hi Thanx for ur guide but still i am having problem to get going and I checked it is not a genu its look like coppy box and when i try to down load the firmware its keep saying stb modal is error and that field is empty only when i try to use firmware 400e_E api bin file its come up GCR3510 on the stb field and its start download 2% then its freezzz I dont know if am doing any thing wrong plezz help meee

Thanx once again

 

OK. Now you say that what you have looks like a copy. Look at the vents on top of the box, and see which of these matches;

First Generation = 13 x 7 vents
Genuine = 25 x 7 vents
Clone = 18 x 7 vents

If you do have a clone, do not attempt to put anything other than 2.57eE_FIXED firmware on to it. At the moment, it will not autoroll the codes when they change, but it won't kill your SV. There is currently no new firmware release to fix the autoroll. Wait until you see one of the guys on here such as scouser or Celtic71 saying that there is a new release, safe and tested for the clones.
It is a pain to manually input the codes when they change, but it's less pain than jtagging a dead box, trust me.

 

Hi

Its Clone = 18 x 7 vents I just counted thanx for that so why i could not download 2.57e_E I tryed so many time but its kept saying or askig for stb, this is what i am doing 1, I open the GTRom 4.0
2, I open bin file
3, I click on download
$, As soon as I click on download i get message saying error no stb found?
I did connecet all the cable ( null) is there any thing els i should do ?

plez help

Thanx

 

Just hang fire for a few minutes. It's so long since I needed to do this, I'm just downloading the firmware and gtrom. I also have no way to connect to the SV at the moment, I just want to look at something.
Did you download this file?
(2) STAR_VIEW_H20060816_257eE_api_FIXED.bin
From the link at the end of my post, from the starview / firmware directory. I've just tried that now, with the gtrom software, and it automatically filled in the STB as GCR 3510.

 

ok thanx

 

Yes i tryed the same one but only its fill 3510when i click on nin file 400e

 

mine is a genuine box could you please tell me what cable i need to download this info ive got same problem thanx

 

u need ver 1.4 zyper

 

Bin File - CryptStar-v1.4-core400.bin

 

You need a null modem cable for this. You should have got one in the packaging that you got your SV in. You should be able to get one from any good computer / electronic shop. It is a 9-pin female to 9-pin female lead. If you don't have a serial port ( most new laptops ), you will also need to get a usb to serial adaptor.

Take a look at this link for examples from Maplin;
http://forums.afterdawn.com/thread_jump.cfm/528527/3197602

Both links still point to the correct cables. It absolutely has to be a NULL MODEM cable, not an RS232, which will look exactly the same if it is a 9-pin female to 9-pin female. You'd be surprised how many shop assistants will say they are the same thing, they ARE NOT

 

You need a NULL modem cable connected to COM1 or the serial port on your pc ... the other end plugs into the starview.

 

Hi

I managed to get the firmware going uo to 20% then its dtoped and freezz then the message came uo saying download fail? i was only using RS232 cable id this why i couldnt download 257e_E? plez help me

Many thanx

 

cheers for the help guys every shop in derby has sold out!!!!

 

I manage to download 100% and is says d/load completed now what do i do? its still no pices? plez help do i have to do factory set up again?

 

@ tmohan
press menu > 1570
go to set default key
press ok
exit to s*y sports & it should update for you.

 

I am really sorry to be so pain but i did what u just said and still no luck i even done the factory set up as well so far no luck !!!