Hi, I brought my Box down to Portlaoise to try on a friends Cho*us true cable. I changed the codes from N*L to Cho*us and set the Frequency to 6875 KEY 00 = 4B 7C D5 86 E7 01 CC 96 KEY 01 = 8E 8E 46 FD 36 28 A3 F0 Turned EMU on Tried manual and auto scan and getting nothing - all failed. When I go to recheck the codes, they have changed back to N*L. I have 4.5 installed on the Box and it works fine in Dublin. Am I missing something or is it the area that won't work?
i will try to help out when u change codes are u pressing ok button for 5 sec.to store on 00 01 ,and are u plugging into cable input? if not u wont pickup chs.
When you go to provider put in th C***** then go to manual scan and put the following in one at a time chorus frequencies set symbol rate 6875 363.000 works 371.000 works 355.500 works 347.000 works 339.500 works 386.000 works 347.500 works 394.000 works 419.000 works 410.000 works 314.000 426.000 322.000 works 347.500 works you do not need to put in the codes as when you are finished entering the freq go to menu then 1570 turn your emu on exit out to a scrambled channel and wait it will find the code by itself could go up to 200% before it does so just be patient ok
Thank you both. I did not hold the button for 5 seconds, but the cable input is correct. I will give it a try as soon as I get home. I did try some frequency scans, but I will try the ones above.
No bother they will work as i am in the C***** area myself come back and let us know how you get on as i said you do not need to put the codes in just the freq and let the box do the rest ok
I have tried all of the above and still no joy. None of the frequencies found anything. I just can't figure it out. Any more suggestions?
you are defo about you being on C***** are you have you an ariel on your roof or how do you get your cable into your house
There is a Chor*s cable coming into the house. There is an old unused Chor*s ariel on the roof which was used before they piped in the cable.
if it is analogue the box will not work there as you need a digital signal as they are digital boxes check with your neighbor do any have the C***** boxes in the area that you know of
That sounds like it might be it. Do you know of another decoder that will work? I have read posts that talk of Euro Vox working with Chor*s. Do they need a digital cable?
Most of these b0xes work with digital frequencys etc and im not sure about other b0xes as someone (Scouser or Fergus) with more info will have to advise you tomorrow sorry
Sorry was out all day so only back now you will not get a box to work on analogue as they are all digital receivers best hope they update your area
