Starview Geniune Box no power?

Hi guys i have a starview genuine box the 25x7 slots and it has no power,ive checked the fuse and everything is good..anybody got any ideas?
Thanks alot

 

Just to add i didnt try to update it or anything just tried turning it on the other day and it wouldnt turn on..no lights on the front or anything
Thanks

 

without stating the obvious, have you tried it on another socket, is the box itself turned on..... just trying to eliminate the obvious!!

 

Yeah i have tried it on several different sockets, power switch is turned on..yeah i understand sometimes the smallest things can be overlooked

 

Ok sounds like a Jtag issue!! best of luck!!

This is from Scouser

JTAG GUIDE

Build the JTAG as below.

JTAG is in the corner of the PCB and is a 20pin connector (no pins, just pads) layed out in a 2 x 10 array.

Pin1 is the square pin.

Connections are as follows:

PIN9 = TMS
PIN11 = TCK
PIN13 = TDI
PIN15 = TDO
PIN19 = TRST

Ground is all even number pins.

VCC is the end of capacitor C40 nearest the processor.

The box must be powered up to be flashed (don't worry about the lack of display or picture)

Flashing with JKEYS
-------------------

Run JKEYS and Detect. Should come up as:

Device ID: 0x1D405041
Device: STi5518MVB-X

Choose the IRD model as 4900

Flash would be 29LV160
Start : 7FE00000
Bytes 20000

Go into flash programmer.

Erase chip first by clicking on Erase in the top right

Flash chip with a working TSOP image by clicking on the top-right Program button.


Flashing with S*YMax UP (Easier!)
--------------------------------

If you are having problems flashing with JKEYS you can also use S*YUP. This is much easier to use.

Click on 2mb (0x7FE00000)
Click Start
Click Erase
Click Write

Choose your flash image .. sit back and wait

Thanks to

SunRise



Jtag Tut

http://www.mediafire.com/?7tzcc4dj3yd


SkyMax 2

http://www.mediafire.com/?8fzumnj1k9g

Jkeys

http://www.mediafire.com/?3z9z322ck2x

260 Jtag Flash Image

http://www.mediafire.com/?49jgvte4o0z

 

Alot of that went straight over my head! haha
Do i need to connect it to my pc to do this?
Oh and i agree with your signature..HAIL HAIL

 

To be honest, I have never actually done one of these my self however I had a quick nose around and that was the solution to previous posters with the same problem,again i know didly sqaut about it but I see there are others around who might help

Nice sig alright!!!

 

Scouser is the main man for jtag info as I know sweet FA about it too or if you are in Dublin/Kildare I might know where you can get it fixed for a small fee

 

Yeah that'd be great, i live near to citywest in dublin but can travel
Thanks!!

 

wonder who that would be celt

 

Colm... I see the Cavalry has arrived thanks Celtic,So Sc0user is the man or do as Celtic suggests and get it done elswere!

 

wasn't cyborcop advertising jtagging as well

 

Colm . private message sent

Trust you 2 to depend on a woman lol

 

Thats also true Karl , I sent pm so hopefully he get it sorted

 

Thanks lads
Hopefully get sorted now
Cheers!

 

Keep an eye on your PM's as you should hear back soon

 

Your welcome bud!! any problems come back to us one of us will help!!

 

hi guys,

Looks like I am having the same issue as the above. As the above solution means nothing to me I'm just wondering if somebody help. It is a genuine starview box just have no power going to it.

Any help at all would be great!

Thanks

 

where are you based?

 

I'm in Glasnevin in Dublin....don't mind travelling with it at all....