No credit to me at all found this on another site and it works perfectly. Quote:i now have full solution for the Sv that hangs on 0, (usualy after jtag) and the reason why they do it . But 4r now hear is the fix 1 remove the cap (c21) electrolytic near the ribbon on the psu board boot the box , it should boot to on and function corectly , the psu will hum inore it , just let it boot to ON ,then turn it back off, then replace electrolytic cap (c11) 1000 mic @10v on the psu board , resolder (c21) thats it done. Plug this will allso fix compleatly dead SV boxes even if the voltages ar correct at the ribbon thanks to plug1 on digital-forums Regards Al
YES like a treat!! Why would i post it if it wasn't. Don't need to belive me anyone who has this problem try it and see. No one has anything to lose as there box is useless anyway. You guys decide. Al
