STARVIEW HELP FILES

Discussion in 'Digital TV - UK & Europe' started by fergusrb, Jul 6, 2007.

Thread Status:
Not open for further replies.
  1. fergusrb

    fergusrb Guest

    Posting codes to the forums is no longer allowed. Please see the following thread for more information.

    http://forums.afterdawn.com/thread_view.cfm/662154


    AS ALL THE FIRMWARE IS NOW OUT FOR UPDATING YOUR BOXES BEST ADVICE IS TO UPDATE TO THE AU FIRMWARE THERE IS NOW NO EXCUSE NOT TO DO THIS ALL THE INFORMATION AND SOFTWARE IS ON THIS SITE FOR YOU TO DO IT PLUS ALL THE HELP YOU NEED AS WELL

    Null Modem Cable

    http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

    If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

    USB Adapter

    http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor

    These two cable links are only for reference as they can be purchased a lot cheaper on fleabay.


    You will need to know if you have a clone or genuine

    Count the vents on top

    18x7 = Clone
    25x7 = Genuine
    13x7 = 1st Generation

    Also looking from the front
    Scart to the left = Clone
    Scart to the right = Genuine

    Also you can go here to see some pics
    http://www.freewebs.com/dooby2oon


    You will need the GTromloader, (Starview Software gtromloader), found in the Starview software folder of the link.

    You will need version Cryptstar - V1.4 genuine only firmw@re for GENUINE found in "Starview" firmware folder.

    You will need version CryptStar-v1.4-Core257.bin firmw@re for CLONES found in "Starview" firmware folder.

    You will need version 4.50 firmware for THE B0X IRELAND found in "THE B0X" firmware folder.

    You will need version 4.51 firmware for THE B0X UK found in "THE B0X" firmware folder.

    You will need version 7.05 firmware for THE SUPER B0X found in "THE B0X SUPER" firmware folder.

    All firmware/loader can be found in the link http://www.cable-closet.com/forum/index.php?topic=2635.msg10219#msg10219


    Updating Firmware

    Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
    (The Starvi*w does not need to be connected to TV to update it with GTROM)

    Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used

    Make sure App file only is selected, then click b1n File & browse to the firmw@re where you downloaded it to on your PC.

    Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC.

    Wait until you see the DOWNLOAD COMPLETE p0p up on your PC before removing the NULL MODEM CABLE.

    The Starview will then reboot

    Disconnect from PC and connect back up to the TV

    To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

    1. Go to the Start Menu
    2. Right click on "My Computer"
    3. Select "Properties"
    4. Click on the "Hardware" tab
    5. Click on "Device Manager"
    6. Click the + sign next to "Ports (COM & LPT)"
    7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
    8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
    9. You should be able to transfer data once the correct port is selected

    If you need drivers go here

    http://www.gilsson.com/usb_drivers_download.htm

    Follow my advice to step 7. Locate your USB Adapter (port *)

    Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
    Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.

    CREATE A CHANNEL DUMP

    Connect the SV to the PC and put it on stand-by

    Open GT ROM LOADER

    Click "Channel Data File"

    Click "UPLOAD" and NAME and LOCATE the channel dump you want to save to your PC , Click SAVE

    Wait till you see the pop up b0x "Download Complete" before disconnecting

    Now open SVCE program and click File > Open > locate the Channel Dump you just saved and move , rename as you like and SAVE , then transfer the file back to your SV and you have the channels in order etc


    TRANSFER CHANNEL DUMP

    Connect the SV to the PC and put it on stand-by

    Open GT ROM LOADER

    Click "Channel Data File"

    Click "BIN File" and locate the channel dump you just downloaded to your PC

    Then click on "Download" and the channels should transfer to your b0x

    Wait till you see the pop up b0x "Download Complete" before disconnecting

    Connect the SV back to the TV and see if you have it now


    Manually Moving Channels

    Press Menu > Channel Edit > 0000 > Press YELLOW button to EDIT > Highlight the channel you want to move > Press the RED button to MOVE > Use your \/ /\ arrows to move it where you want and press OK

    Repeat till you have them sorted in the order you like

    When your finished , press EXIT and it will save them for you



    This is from Scouser

    JTAG GUIDE

    Build the JTAG as below
    .

    JTAG is in the corner of the PCB and is a 20pin connector (no pins, just pads) layed out in a 2 x 10 array.

    Pin1 is the square pin.

    Connections are as follows:

    PIN9 = TMS
    PIN11 = TCK
    PIN13 = TDI
    PIN15 = TDO
    PIN19 = TRST

    Ground is all even number pins.

    VCC is the end of capacitor C40 nearest the processor.

    The box must be powered up to be flashed (don't worry about the lack of display or picture)

    Flashing with JKEYS
    -------------------

    Run JKEYS and Detect. Should come up as:

    Device ID: 0x1D405041
    Device: STi5518MVB-X

    Choose the IRD model as 4900

    Flash would be 29LV160
    Start : 7FE00000
    Bytes 20000

    Go into flash programmer.

    Erase chip first by clicking on Erase in the top right

    Flash chip with a working TSOP image by clicking on the top-right Program button.


    Flashing with S*YMax UP (Easier!)
    --------------------------------

    If you are having problems flashing with JKEYS you can also use S*YUP. This is much easier to use.

    Click on 2mb (0x7FE00000)
    Click Start
    Click Erase
    Click Write

    Choose your flash image .. sit back and wait

    Thanks to

    SunRise



    Jtag Tut

    http://www.mediafire.com/?7tzcc4dj3yd


    SkyMax 2

    http://www.mediafire.com/?8fzumnj1k9g

    Jkeys

    http://www.mediafire.com/?3z9z322ck2x

    260 Jtag Flash Image

    http://www.mediafire.com/?49jgvte4o0z
     
    Last edited by a moderator: Jun 6, 2008
  2. fergusrb

    fergusrb Guest

    Sound Problems

    To get back sound on e4 sky1 ect just select the channel in question press menu,
    select installation, select manual scan, click ok on down frequency.
    It'll now scan for channels when its finished exit back to normal
    tv viewing screen go to the end of your channel listing and the desired channel will be there with sound.
    This can be done on any channel with no sound by just selecting that channel following the instructions above.
    Hope this helps
     
    Last edited by a moderator: Jul 7, 2007
  3. fergusrb

    fergusrb Guest

    If you have a Bad Flash with software have a Read of This might help

    If you have a bad flash, switch it off then on at the back & make sure its on standby.
    Then Flash as normal. This also applies to flashing (up & downloading) the channel data file.
    If for some reason you cannot flash and have set and checked everything else such as ports and connections,
    then you should switch off at the back wait a moment then on again. Then try to flash again.

    If for some reason it won't go into standby and you see a constant moving green line.
    you may want to wait to see if it goes into standby or switches on eventually or re-flash from this state
    though it may not work. Some users have reported that flashing an older firmware 1st that was working,
    then trying again may help. If your flash has failed or corrupted try again but 1st flash back the firmware
    that was on before your failed flash. Re download the firmware just in case you had a corrupted file then try again.
    If you do flash from the moving green line state at boot, you will see the % increase on the GTRom loader
    software but not on the Starview. Toward the end of the flash you'll see a Flash Burning message in GTRom.
    Make sure you wait until all is finished and you see the Download complete pop up message in GTRom.

    Another method you can use to recover from a bad flash, eg. the box won't boot to standby and is stuck
    in pre standby, either after about 3 or 4 moving green lines the box sticks with the green line not moving
    at all or it keeps moving forever. If the box will NOT RE-FLASH as normal from on or standby, try this but it
    may take a few goes to work.

    Connect the box to the pc with your cable but switch it off at the back. Load the correct
    firmware bin file into GTRom & set it to the correct com port, and select App file only then hit Download.
    Only then switch on at the back to power on the box. It may take a few sec. so wait at least 30 sec.
    (If it doesn't work 1st time try also waiting a couple of sec. to switch on after pressing download in the loader.) It may take more than 1 try to work, but eventually you'll see the loader kick in and the % bar increase. You won't see the % on the Starview though. Only green lines moving left to right. Towards the end of the flash you'll see a message in GTRom saying FLASH BURNING. Then it will reach 100% and wait for the download complete pop up box to appear & the box will reboot back to factory setup. You will have lost any channel data previously on the box & will need to rescan & switch on EMU and set the box up from scratch.

    If you don't know the state of the box switch it on see what happens see if there already has been a channel
    scan done before-meaning there are channels on it working or not. If so tune to an unencrypted channel as above
    then standby then re-flash.

    "If you are using a USB to Serial converter, once you have installed it you need to check if your PC is using the correct port for the GTRom loader. Otherwise GTRom will stay at 0% and return "Flash Failed" after about 30 seconds.

    Solution, click start/control panel/system/hardware tab/device manager.
    Click the plus sign next to ports on the list. Your adapter will show up as a USB to Serial Bridge with the port number next to it.

    If the port number is outside the 1-4 port range then right click on it select Properties/port settings/advanced.

    On the bottom left of the pop-up screen you will see the port number with a drop down arrow, click on the arrow and select a port in the 1-4 range. Click OK and exit all. Select the same port in GTRom and everything should be OK."
     
    Last edited by a moderator: Mar 12, 2008
  4. fergusrb

    fergusrb Guest

    if you have Missing channels you can try this.

    I have seen a few posts about channels missing when doing a full scan.
    Here's a little trick you can try that may help if you're having problems
    finding any particular channels or are missing channels:
    Try and determine the lowest transponder frequency that you can get a signal on.
    Look at the frequencies you already have on the channels saved so far and choose the lowest.
    Then in the installation menu select MANUAL SCAN and set that as the frequency.
    Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow.
    While still highlighted, click OK.
    Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).
    Using this method my Starview indicated it scanned 56/56 transponder frequencies as opposed to 48 in Auto scan on one main provider.
    I also gained a few extra channels.
    The other transponders may have been picked up by scanning other providers.
     
    Last edited by a moderator: Jul 7, 2007
  5. MAINAMN

    MAINAMN Active member

    Joined:
    Apr 6, 2007
    Messages:
    1,316
    Likes Received:
    0
    Trophy Points:
    66
    Frequency change fix
    1 Menu
    2 Factory settings
    3 type in code ( 0000)
    4 press ok. this will delete channels.
    5 Installation
    6 Change provider (Eg n*L etc)to which ever one used in your area.
    7 autoscan ( when it says *** channels found , exit back out all the way until u are back at the scrambled/no signal 'tv' screen)
    8 Hit menu again
    9 go into parental control
    10 press info on remote and type in 2004
    11 new screen appears , change EMU to on
    Then exit back out all the way until u are back at the scrambled/no signal 'tv' screen and hey presto your sorted !
     
    Last edited: Jul 19, 2007
  6. fergusrb

    fergusrb Guest

    DATA UPLOADING LOOP PROBLEM FIX

    If the box has had an older software installed which was working but no longer updates then switch it off at the back then back on again and tune to an unencrypted channel No £ symbol quickly before it gets caught in an auto-updating loop. Select OK and the channel list appears, move up or down to select a channel without a green pound symbol on the right £ & hit ok. Make sure the channel is working then switch it into standby on the remote or the front of the box
    You will then see the clock If an older firmware is on the box and
    it starts to autoupdate the keys but then sticks and then you put it in standby you will not be able to flash the box correctly you must go into standby from a working unencrypted channel first

    SOUND OUT OF SYNC PROBLEM FIX AND LOST CHANNEL

    Make a note of the affected channels frequencies, then delete them. Then manually rescan on the noted frequencies. The channels should return at the bottom of your list with sound ok

    FOR AUTO EMU TO WORK ON SCRAMBLED CHANNELS

    when software installed and box connected with channels installed you will have to turn on the auto update emul8er

    to descramble channels

    to do this all you have to do is

    go to parental control in receiver menu

    press ( info ) + (2004)
    (or press (menu) 1570)
    key and emu buttons should now be visible

    switch key emu to on position
    go to scrambled channel and wait for update .
    Starview box manual key input

    Entering keys manualy works fine.
    Works with all firmware except 258 as known to have issue's with getting secret menu up
    also no need to scan/reset just follow instructions below

    To put keys in manualy do as follows.

    press menu
    press 1570. this takes you into secret menu
    Hit ok on nagravision
    and change both keys 00, and key 01

    Make sure your cable provider is listed at top NTL or TELEWEST C&W CHORUS ect you have to only input keys for your provider
    To change between the 2 keys
    highlight key number press right and left
    When changed hit ok (To store) after each one..


    (YOU MUST SAVE EACH KEY INDIVIDUALLY - I.E. AFTER CHANGING KEY 00 MAKE SURE
    YOU STORE BEFORE CHANGING KEY 01 (TO STORE PRESS OK)after this make sure your emu is turned on then go to a paid channel and should update

    UPLOADING SOFTWARE TUTORIAL
    1. Plug Starview in at the mains;
    2. Plug in null modem cable and join up box with
    PC using COM port on PC (there is only one socket for
    this on the Starview you cant go wrong);
    3. Open up GTRom loader or whatever sofwtare you have
    for loading image on the box.
    4. Click on "BIN File" on GTRom and load the
    Auto update BIN File file that you have

    5. Now click download button and you sill se the
    file being downloaded.
    6. Once complete a mssage will apppears saying
    something like "download successful".
    7.Ideally you should try and get a bin file channel
    list for your area and load this as well it will save a lot of time.
    8. Alterantively, plug box in and press Menu on
    remote, installation, choose your cable provider,
    then move don to automatic scan and press ok.
    9. Once all channels have been found press exit back to TV screen.
    10. Now press menu, parental control, press ok.
    Now press i then 2004. Move down to Key Emu and change option
    to on. Press ok , then exit back to TV Screen.
    11. Go to scrambled channel and wait on keys updating.
    12 That should be you.

    IF YOU HAVE HAD A BAD FLASH OR NOT GETTING ALL CHANNELS OR OTHER SOUND PROBLEMS GO TO PAGE ONE AND LOOK UNDER FERGUS POSTINGS

    IF YOU ARE WANTING SOFTWARE LOOK UNDER FERGUS OR RYANMG OR SCOUSER OR MAINAMN OR EAMO32 POSTINGS

    FACTORY RESET

    Factory settings can be found by pressing menu - factory settings - type 1668 and press ok. Autoscan go to menu installation and press automatic scan. Make sure key emu is on after this by pressing menu, type 1570 on highlighted installation button. key emu button is at the bottom of the cas menu make sure it says on.
     
    Last edited by a moderator: Jul 7, 2007
  7. fergusrb

    fergusrb Guest

    CHANNEL LIST AND FREQ (NOT ALL AREAS)


    CHANNEL
    FREQ CHANNEL FREQ CHANNEL FREQ
    BBC 1 435000 EXTREME 683.000 UK GARDENS 627.000
    BBC 2 435.000 CELTIC TV 683.000 UK HISTORY 627.000
    STV 427.000 MAN UTD TV 555.000 UK HISTORY + 1 347.000
    CHANNEL 4 427.000 RANGERS TV 683.000 UK PEPOLE 347.000
    FIVE 427.000 EUROSPORT 1 555.000 UK STYLE 627.000
    ITV 2 307.000 EUROSPORT 2 363.000 UK STYLE + 1 347.000
    ITV 3 307.000 EUR/SPORT NEWS 635.000 UK BRIGHT IDEAS 355.000
    ITV 4 523.000 NASN SPORT 523.000 ANIMAL PLANET 395.000
    E 4 563.000 AT THE RACES 523.000 NATIONAL GEOGR 555.000
    E 4 + 1 459.000 RACING UK 459.000 NAT GEO WILD 419.000
    MORE 4 523.000 LIVE EVENT 1 619.000 HISTORY CHAN 419.000
    FX 315.000 LIVE EVENT 2 411.000 BIOGRAPHY CH 419.000
    HALMARK 411.000 SKY PREM 411.000 ZONE REALITY 683.000
    LIVING 387.000 SKY PREM+ 1 411.000 DISCOVERY CIV 395.000
    LIVING + 1 387.000 ACTION 675.000 DISC TRAVEL +LIV 395.000
    LIVING 2 387.000 DRAMA 675.000 DISC REALTIME 395.000
    FIVE US 315.000 FAMILY 675.000 DISC REALTIME X 635.000
    FIVE LIFE 315.000 MODERN 411.000 DISC CH 395.000
    UK DRAMA 627.000 SCI-FI/HORROR 675.000 DISC CH + 1 395.000
    SCI-FI 419.000 INDEPENDENT 675.000 DISC HOME + HEA 395.000
    BRAVO 387.000 MOVIES 24 315.000 DISC SCIENCE 395.000
    BRAVO+ 1 387.000 CLASSIC 675.000 DISC TURBO 395.000
    BRAVO 2 299.000 TCM 691.000 TEACHERS 691.000
    UK GOLD 627.000 FILM 4 523.000 COMMUNITY CH 355.000
    UK GOLD + 1 347.000 FILM 4 + 1 523.000 GOD CH 683.000
    UK GOLD 2 627.000 ZONE HORROR 315.000 ADULT CH 555.000
    UK GOLD + 2 347.000 MTV 379.000 PLAYBOY 347.000
    ABC 1 563.000 MTV2 379.000 RED HOT ALL GIRL 683.000
    FTN 635.000 MTV FLUX 379.000 RED HOT AMATEUR 683.000
    PARA COM 1 379.000 MTV HITS 379.000 REDHOT WIFES 363.000
    PARA COM 2 419.000 MTV BASE 379.000 SPICE EXTREME 523.000
    CRIME & INV 315.000 MTV DANCE 379.000 100% BABES 411.000
    BBC 3 291.000 VH1 379.000 TELEVISION X 411.000
    BBC 4 291.000 VH1 CLASSIC 379.000 QVC 627.000
    E! ENTERT 451.000 Q 491.000 BID TV 691.000
    CHALLENGE 387.000 MAGIC 523.000 GEMS TV 683.000
    PERFORMANCE 395.000 SMASH HITS 523.000 GEMS TV 2 299.000
    CURRENT 419.000 THE BOX 419.000 PRICE DROP 691.000
    MEN & MOTOR 691.000 THE HITS 355.000 BEST DIRECT 523.000
    GRAMPAIN 427.000 TMF 379.000 PRICE CRASH 315.000
    BORDER 427.000 KERANG 523.000 SPEED AUCTION 387.000
    ITV 1 563.000 KISS 491.000 DEUTSCHE WELLE 683.000
    BBC HD 371.000 BBC NEWS 24 435.000 LEONARDO 459.000
    ITV HD 371.000 CNN INTER 395.000 TV 5 619.000
    SKY SPORT 1 491.000 CNBC 379.000 ZEE CINEMA 299.000
    SKY SPORT 2 411.000 EURONEWS 355.000 SONY ENT TV ASIA 395.000
    SKY SPORT 3 491.000 BLOOMBERG 555.000 STAR NEWS 363.000
    SPORT XTRA 411.000 BBC PARLIAMENT 387.000 STAR PLUS 363.000
    PREM PLUS 555.000 UK FOOD 627.000 B4U MOVIES 619.000
    SETANTA 1 683.000 UK FOOD +1 347.000 B4U MUSIC 619.000
    SETANTA 2 683.000 UK DOCUMENTRY 627.000 ARY DIGITAL 619.000
    SETANTA GOLF 459.000 UK DOC + 1 347.000 MAX 459.000


    ZEE TV 299.000 NICK REPLAY 363.000 DISNEY CH + 1 491.000
    BABY 315.000 NICK JUNIOR 363.000 DISNEY CINEMAGIC 491.000
    CBEEBIES 291.000 NICKTOONS 363.000 BB LIVE FEED 299.00
    CBBC 291.000 JETIX 555.000 MOVIES HD 1 355.00
    CITV 299.000 JETIX + 1 363.000 MOVIES HD 2 299.00
    BOOMERANG 691.000 TROUBLE 387.000 CN TOO 691.000
    BOOMERANG + 1 691.000 TROUBLE + 1 347.000
    PLAYHOUSE DIS 491.000 CARTOON NETWORK 691.000
    NICHOLODEON 363.000 DISNEY CHANNEL 491.000

    AREAS

    Location Co Net Id Freq Sym Rate

    7 Kings ex c&w 41050 666.750 6.952
    Abbeydale (Gloucester) TW 40971 651.000
    Acton N*L ex C&W 41047 666.750 6.887
    Acton N*L 41050 666.750 6.887
    Aldeershot N*L 00003 755.000 6.887
    Ashton-u-Lyne N*L ex C&W 41066 666.750 6.952
    Ashford Ex C&W 41052 666.750 6.887
    Aylesbury N*L ex C&W 41051 666.750 6.887
    Barking N*L ex C&W 41050 666.750 6.887
    Barnsley TW 40926 539.000 6.952
    Basildon Laindon TW 40975 411.000 6.952
    Batley N*L 00001 755.000 6.887
    Bath TW 40970 651.000 6.952
    Barnes TW 40979 531.000
    Basingstoke N*L 00013 803.000 6.887
    Batley N*L 00001 755.000 6.887
    Bedford N*L 00005 755.000 6.887
    Belfast (Ireland) N*L 00021 755.000 6.887
    Bexley Heath N*L 41050 666.750 6.887
    Biggin Hill N*L 41041 666.750 6.952
    Bigglesworth-Beds N*L 00005 755.000 6.887
    Birmingham TW/C&W 41011 643.000 6.952
    Bermingham TDN 41015 499.000 6.952
    Bermingham TND Trial 41022 499.000 6.952
    Bermingham Trial BM01 40993 643.000 6.952
    Bermingham Trial BM01 41008 643.000 6.952
    Blackburn N*L 41048 666.750 6.952
    Bolton N*L EX C&W 41060 666.750 6.887
    Bournemouth Ex C&W 41043 666.750 6.887
    Bradford W.Yorks TW 40961 539.000 6.952
    Bridgend N*L 00004 755.000
    Brighton N*L 41044 666.750 6.952
    Bristol TW 40970 651.000 6.952
    Bromley N*L/ex C&W 41041 666.750 6.887
    Burnley Lancs N*L ex C&W 41048 666.750 6.887
    Bury TW 41060 666.750 6.952
    Canvey Island TW 40976 411.000
    Cambridge N*L 00009 755.000 6.887
    Camden TW 40985 515.000 6.952
    Cardiff N*L 00004 755.000 6.887
    Carlisle OM 42650 322.000 6.887
    Cheltenham Glos 1 TW 40971 433.000 6.952
    Cheltenham Glos 2 TW 40971 651.000 6.952
    Chelmsford TW 40977 411.000
    Cheam TW 40979 531.000
    Chesham Bucks Ex C&W 41051 666.750 6.887
    Cheshunt N*L 00005 666.750
    Chorly Lancs TW 41018 411.000 6.952
    Corringham TW 40978 411.000 6.952
    Chingford London Ex C&W 41050 666.750
    Chorley TW 41018 531.000
    Colliers Wood TW 40979 531.000
    Coventry N*L 00019 811.000 6.887
    Crawley TW 41020 411.000 6.952
    Croydon TW 40979 531.000 6.952
    Croxly Green EX C&W 41051 666.750 6.952
    Dagenham Ex C&W 41050 666.750 6.952
    Derby EX C&W 41056 666.750 6.952
    Dewsbury N*L 00001 755.000 6.887
    Dublin Ireland N*L 6887
    Dudley TW 40973 131.000
    Dunstable 1 N*L 00005 755.000 6.887
    Dunstable 2 N*L 00005 643.000 6.887
    Durby 1 Ex C&W 41046 666.750 6.887
    Durby 2 Ex C&W 41056 666.750 6.887
    Dundee TW 40982 619.000 6.952
    Dublin (Ireland) N*L 42753 363.000 6.887
    East London Ex C&W 41050 666.750 6.952
    Edenbridge TW 41020 411.000 6.952
    Edinburgh/Lothian TW 40981 619.000 6.952
    Ely Cambs N*L 00009 755.000 6.887
    Essex 1 N*L ex c&w 41050 666.750 6.887
    Essex 2 TW 40978 619.000 6.952
    Farnham N*L 00003 755.000 6.887
    Farnborough N*L 00003 755.000 6.887
    Falkirk TW 40981 619.000 6.952
    Fife TW 40981 619.000 6.952
    Gateshead TW 40969 571.000 6.952
    Glasgow 1 N*L 00002 755.000 6.887
    Glasgow 2 TW 40984 619.000 6.952
    Gravesend-Kent TW 58700 414.000 6.952
    Grimsby 1 N*L 00022 755.000 6.887
    Grimsby 2 N*L 00022 643.000 6.887
    Gt Yarmouth Ex C&W 41055 666.750 6.952
    Guilford 00003 755.000
    Hackney N. London TW 40985 515.000 6.952
    Hampshire 41042
    Hampton TW 40979 531.000
    Hanwell W.London N*L 41047 562.750 6.887
    Hanwell W.London N*L 41047 666.750 6.887
    Harrow N*L ex C&W 41047 539.000 6.952
    Harlow N*L 00009 579.000 6.887
    Hemel Hempstead N*L 00017 803.000 6.887
    Hearts & Beds. N*L 00005 643.000 6.887
    Heston Middlesex TW 40980 539.000 6.952
    High Wycombe N*L 00013 803.000 6.887
    Hounslow/Osterley TW 40979 531.000 6.952
    Huddersfield TW 40961 539.000 6.952
    Huddersfield N*L 00001 755.000 6.887
    Ilford Ex C&W 41050 666.750 6.887
    Ipswich N*L 00011 755.000 6.887
    Irvine OM 42648 322.000 6.952
    Kew TW 40979 531.000
    Kingstone TW 40979 531.000 6.952
    Kidderminster Worcs. TW 40974 130.000 6.952
    Kildare Ireland C***** 01537.324.000 6875
    Keighley TW 40961 539.000
    Kilburn TW 40985 515.000 6.952
    Kenton Ex C&W 41047 666.750 6.952
    Kingsbury Ex C&W 41047 666.750
    Leyland Lancs. Ex C&W 41000 531.000 6.887
    Lancaster OM 42653 322.000 6.887
    Leeds Ex C&W 41053 666.750 6.952
    Leicester 1 N*L 00012 643.000 6.887
    Leicester 2 N*L 00012 739.000 6.887
    Leamington Spa N*L 00016 803.000 6.887
    Lewisham N*L ex C&W 41047 666.750 6.887
    LIVERPOOL 1 - NORTH TW 40966 571.000 6.952
    LIVERPOOL 2 - NORTH TW 40965 571.000 6.952
    Liverpool SOUTH TW 40916 411.000 6.952
    Luton 1 N*L 00005 755.000 6.887
    Luton 2 N*L 00005 739.000 6.887
    Maidstone Kent TW 40976 619.000 6.952
    Manchester 1 N*L ex C&W 41040 666.750 6.887
    Manchester 2 N*L ex C&W 41060 666.750 6.952
    Mansfild Notts N*L 00008 755.000 6.887
    Mansfild Notts N*L 00008 739.000 6.887
    Morden TW 40979 531.000
    Mortlake TW 40979 531.000
    Micham TW 40979 531.000
    New Addington TW 40979 531.000
    Newbury Berks. N*L 00013 803.000 6.887
    New Malden TW 40979 531.000
    North Lanarkshire TW 40984 619.000 6.952
    North London TW 40985 515.000 6.952
    North West London N*L 00005 666.750 6.887
    Norwich Ex C&W 41055 666.750 6.952
    Nottingham 1 N*L 00008 755.000 6.887
    Nottingham 2 N*L 00008 739.000 6.887
    Northampton N*L 00018 579.000 6.887
    Nuneaton N*L 00016 803.000 6.887
    Oxford 1 N*L 00020 578.250 6.887
    Oxford 2 N*L 00020 818.250 6.887
    Oxford 3 N*L 00013 803.000 6.887
    Peterborough 1 N*L 41049 666.750 6.887
    Peterborough 2 N*L 00009 755.000 6.887
    Plumsted Ex c&w 41047 666.750 6.887
    Plymouth TW 40988 787.000 6.952
    Porthcawl N*L 00004 755.000
    Portsmouth (Cosham) N*L 41042 666.750
    Portsmouth (Solent) N*L ex C&W 41042 562.750
    Port Talbot N*L 00007 755.000 6.887
    PooleN*L EX C&W 41043 666.750 6.952
    Potters Bar N*L EX C&W 41051 666.750 6.952
    Preston Lancs. TW 40968 531.000 6.952
    Purley TW 40979 531.000
    Rainford (StHelens) TW 40966 571.000 6.952
    Rayens Park TW 40979 531.000
    Reading N*L 00013 803.000 6.887
    Readitch TW 40974 131.000 6.952
    Rochdale TW 41060 666.750 6.952
    Richmnd upon Thames TW 40979 531.000 6.952
    Runcorn N*L EX C&W 41048 666.750 6.952
    Rugby N*L 00016 803.000
    Sedgley Wst Midlnds TW 40973 6.952
    Seven Kings Ex C&W 41050 666.750 6.952
    Shefild TW 40963
    Sheperds Bush N*L 41050 666.750 6.887
    Sittingbourn Kent TW 40976 666.750
    South Herts. EX C&W 41051 666.750
    South Yorks. TW 40964 539.000
    Southampton 1 EX C&W 41048 666.750 6.887
    Southampton 2 EX C&W 41071 666.750 6.887
    St Albans N*L 00017 803.000 6.887
    Stafford N*L 00015 826.250 6.887
    Steavanage N*L 00005 755.000
    Stockport EX C&W 41066 666.750 6.887
    Stoke on Trent 1 EX C&W 41063 666.750 6.887
    Stoke on Trent 2 EX C&W 41064 666.750 6.887
    Surbiton TW 40979 531.000
    Surry Ex C&W 41045 666.750 6.887
    Sussex N*L 41044 666.750 6.887
    SWINDON 1 N*L 00006 579.000 6.887
    SWINDON 2 N*L 00006 803.000 6.887
    Swansea N*L 00007 755.000 6.887
    Sutton/Micham TW 40979 531.000 6.952
    Teeside N*L 00010 571.000 6.887
    Telford TW 40973 131.000 6.952
    Tooting TW 40979 531.000
    Thames Valley N*L 00013 803.000 6.887
    Thornton Heath TW 40979 531.000
    Tolworth TW 40979 531.000
    Twickenham TW 40979 531.000
    Uddingston TW 40984
    Upton Pk Ex C&W 41050 666.750
    Walsall West Mids. TW 40974 131.000 6.952
    Waltham Abbey Ex C&W 41050 666.750 6.952
    Warwick 00016 803.000
    Warrington N*L ex C&W 41060 666.750 6.952
    Washngton Tyne+Wear N*L 41054 666.750 6.887
    Watford Herts N*L ex C&W 41051 666.750 6.952
    Waterford N*L 42754 666.750 6.887
    Waterford N*L 42747 666.750 6.887
    Waterloo EX C&W 41047 666.750 6.952
    Wearside EX C&W 41054 666.750 6.887
    Wembly EX C&W 41047 666.750 6.887
    Walthamstow London EX C&W 41050 666.750 6.952
    West Bromwich TW 40974 131.000
    Westminster London EX C&W 41047 666.750 6.952
    Wimbledon TW 40979 531.000
    Wigan TW 40967 531.000 6.952
    Wessex Ex C&W 41043 666.750 6.887
    West London/Midlsex TW 40980 539.000 6.952
    West Yorkshire TW 40961 539.000 6.952
    West Yorkshire N*L 00001 755.000 6.887
    Widnes Cheshire N*L EX C&W 41048 666.750 6.952
    Wigan TW 40967 531.000 6.952
    Wirral Merseyside 1 Ex C&W 41048 666.750 6.952
    Wirral Merseyside 2 Ex C&W 41060 666.750 6.952
    Woking Surry N*L 00003 643.000 6.887
    Wolverhampton N*L / TW 40973 131.000 6.952
    Woodgreen TW 40985 515.000 6.952
    Worcester Park TW 40979 531.000
    York Ex C&W 41065 666.750 6.887
    York Ex C&W 41064 666.750 6.887
    Yardly W-Mids 41015 643.000 6.88
     
    Last edited by a moderator: Nov 28, 2007
  8. fergusrb

    fergusrb Guest

    GENUINE OR CLONE Starv**w
    Counts the vents on top


    First Generation = 13 x 7 vents
    Genuine = 25 x 7 vents
    Clone = 18 x 7 vents

    To input keys manually :

    press menu
    press 1570. (this takes you into secret menu)
    Press OK on "nagravision"
    Make sure your cable provider is listed at top N*L or T***WEST C&W CHO**S ect
    Go down to "Key Number" and check its on 00
    Go down again to "Key Data" and input the correct keys
    Press OK to store
    Go back up "Key Number" and change to 01 using the > button on the remote control
    Go back down again to "Key Data" and input the correct keys
    Press OK to store
    Press "Exit" , Check the bottom option and make sure "Key EMU" is On
    Press Ok again
    Then "Exit and "Exit" again back to the main tv screen
    Then go to a paid channel and should update .
    t button on your tv remote not on the Starview remote when the tele text comes up
    just go back off wait about three sec and the colour should come back.if that doesn't work try changing your scart lead.

    Make sure you're set to TV Type PAL in user settings. Also remember the TV out scart on the Starview is the only one that
    supports RGB the other one is only Composite video. If you have a second scart on the tv try that one in case its the telly scart.

    Blac White

    When its black and white press the tele text button on your tv remote not on the Starview remote when the tele text comes up
    just go back off wait about three sec and the colour should come back.if that doesn't work try changing your scart lead.

    Make sure you're set to TV Type PAL in user settings. Also remember the TV out scart on the Starview is the only one that
    supports RGB the other one is only Composite video. If you have a second scart on the tv try that one in case its the telly scart.
     
    Last edited by a moderator: Jul 20, 2007
  9. fergusrb

    fergusrb Guest

    chorus frequencies set symbol rate 6875

    363.000 works 371.000 works
    355.500 works 347.000 works
    339.500 works 386.000 works
    347.500 works 394.000 works
    419.000 works 410.000 works
    322.000 works 347.500 works
    314.000 426.000
    444.000
     
    Last edited by a moderator: Sep 21, 2007
  10. fergusrb

    fergusrb Guest

    To update a Genuine SV , you will need 3 things first .

    1. A Null Modem Cable (9 pin female to 9 pin female)
    2. GT Rom Loader (Software)
    3. V4 .bin file (Firmware)

    Number 1 , either you got it with your SV or you will have to buy it
    Number 2 and 3 can be downloaded below , thanks to Eamo.
    Eamo's SV Library
    http://eko.4shared.com/

    If you need to update your stsrview 2TheBox the firmware is in the same folder ok



    we are at this link so just click on it and you will be brought straight there sorry for all the confusion

    http://forums.afterdawn.com/thread_view.cfm/4/531375
     
    Last edited by a moderator: Feb 15, 2008
  11. martinme

    martinme Regular member

    Joined:
    May 27, 2007
    Messages:
    351
    Likes Received:
    0
    Trophy Points:
    26
    Last edited: Jan 9, 2008
Thread Status:
Not open for further replies.

Share This Page