starview installation

could someone help me please iv just bought i starview the box and i aint got a idea on how to set it up i have a N*L connection and a splitter with one end going to my TV and one going to my box but theres no signal and i have no channels could any one help me please on the set up and installation of you you have a link to a video that would help
thanks

 

Have you flashed it? If not have a look here

 

keeps falling please help

 

Are you following the guide. What firmware are you using and what cable/cables?

 

to be honest i dont even know witch box i got, its got 14 vents and 4 rows in each corner and im using a RS232 cable

 

What does it say on the front of the box, i.e. Starview, The Box or The Box Super?

 

its says the box pvr

 

You picked the hardest one and that guide I gave you will only take you part of the way. Look in Eamos at the end of most post. In the The Box PVR folder you will find all you need, i.e. firmware, loader and guides.

 

still not working please has anyone got any better instructions please

 

Have you updated the version on the b0x ?

Where are you located ?

What problems have you still got ?

 

im using the instruction from here http://www.4shared.com/account/home.jsp and i dont understand why it always says failed, im in the U.K and i dont evan no if iv got it connected up properly i just want some clear cut easy instructions to follow please or help

 

and no i dont no how to update or flash the box

 

OK if it says failed , you more than likely have an RS 232 cable and you need a NULL MODEM CABLE .

TV cable goes in to Cable 1 Input (top right of the four sockets that are together) , You need to connect the PVR to TV with a scart lead.

 

Have you downloader the PVR loader here:
http://www.4shared.com/file/32157004/d1ec34ca/PVR_Loader.html

Firmware version here:
http://www.4shared.com/file/35843058/f5875d05/BoxPVR_E_v4506_15Oct.html

You will also need W1nRar to extract the files here:
http://www.4shared.com/file/39125113/4d7fba7e/WinRAR.html

 

so to get this to work properly what do i have to do, flash it and what else, thank you for all your help o yea when my b0x turns on it say on for a bit den these wired other signs come up,

 

When you update the version on your b0x , goto Menu/System Setup/Press ok when Parental Control is highlighted, then i (info) then 2007, you may need to do this a couple of times to get your remote button speed presses correct, you should then be in the 'Cas System' menu, make sure the bottom item 'Auto Update' is set to on.
Goto a scrambled channel and wait for it to update can take a minute or so.

 

thank you for all your help you are a very helpful person and i will try all this 2mo, thanks again

 

iv flashed it but i am not getting any signal any ideas

 

Presuming you have a live feed, have you got the cable in the cable in sockets. You need to loop the tuners also, the guides are there to help you.

 

sorry i no im a pain but witch guide could you show me a link or something please or talk me thro it? thanks