Starview lost channels

Help required to regain lost scrambled channels Starview box. been without over a week don't know the steps Please advise procedure

 

have you turned the emu on? if you have and still nothing take it back to factory settings and set up from scratch all your channels will then be back on.

 

i have entered on the menu of starview box the code 1570 but still i cant get the scrambled channels to unscramble can anybody help?

 

go to main menu press 1570.this brings you to the cas menu go down and turn emu on.then go to a scrambled channel and let it un scramble.
if you don't have v2.57 fixed or v4.00 firmware on it the channels won't unsrcamble and you will have to put the keys in manual.

 

i have v2.58 is this a problem and i entered 1570 on the menu but still no other menu comes up.

 

yeah you need to flash to 2.57 or v4.00 depending on if you have a clone box or a genuine box.

 

how do i change my box from v2.58 to v2.57?

 

ok do you have a null modem cable.if you don't you need to buy one.then you need gtrom loader and 2.57 you can get both of these at the bottom of my post.

 

i received a white cable along with my box is this the null modem cable?

 

The cable is a 9 pin female to female and it sounds like the right one if it came with the SV box

 

and with this lead connect all the box up and this should enable the code 1570 to work on the main menu?

 

You need to downlaod the gt rom loader and the 2.57 fixed (For clones) both att he bottoms of Ryans post . Connect the SV to your PC , Make sure the SV is on Standby , Open the gt loader and locate the 2.57fixed .bin file , then click on downlaod , it should update the box and you should see it to 100% , It should be updated and allow you into the secret cas menu to manual input the codes.

 

after downloading that file and then connecting the SV to the computer the file didnt download onto the SV.