hi to all,i`ve got a starview v1 here which came with 2.57 on it have reflashed it with 3.00 and then 4.00 which went on to it fine,now i`ve done my scan found all channels but the picture is constantly breaking up/freezing but all the sound is ok,have tryed 3 different scarts,factory reset box tryed again and still no joy,is it possibly a tuner problem and are they easy enough to fix or is it something else,all the best and thanks,ginga1.
hiya,yes mate was breaking up on 2.57 when put new codes in,then i`ve put 4.00 on and still same do you think it could be a tuner prob,have done quite a few of them now and never had this prob before,thanks,ginga1.
No i wouldnt think so ,dont think you'd get many channels if it was a tuner problem might be a cable problem how is the picture when you plug the coax back into your tv?
hiya i`ve done it for a mate my dbox2 is fine off all the same cable,scart etc,shal i be best opening it up check if anything blown etc,is a bit strange as all sound is fine no stuttering,its like big squares and like a flash of bright green then flashing up bad scramled channel for a sec just cant seem to fix on a signal checked strength of signal all fine,duno what else to try,ginga1
have a look at this it might help it came from the starview link at the end of my post http://img89.imageshack.us/img89/725/svcapfixpnggv2.png http://forums.afterdawn.com/thread_view.cfm/531363
hiya,have looked at that cap mate and alls okay have checked all the others on the board and all those fine too,anything else to look for,have blown my com port on pc so when i get time shal have another go at flashing it,all this board looks fine,could the scart on the box be knackered,ginga1.
maybe give it a go,maybe some of the other lads and lassies might have an answer if there around later,but you might as well change the scart and see.
hiya,sound where do you get them from,seems as though its gota be connection (maybe)i dont know will see if someone else knows will wait a few days and try reflash first i think,but ay thanks for your help and you have a good one,let you know how i get on,cheers,ginga1
one thing gets overlooked co axial lead is it new ? try checking connections when problem occurs as in loose tight?
well you say your connections are fine on your othr box ginga i'd just try and reflash with the 400 again
Try do a factory setting first , then connect it to the PC and flash it with 2.57_FIXED, Connect back up to TV and Select English and follow with Installation and see if that helps If that helps and if you are sure its a GENUINE b0x then do it again and update with 4.00
