starview v 400 not finding channels

I have Starview 2 (The Box) after installing v400 it wont find any channels, It works with v300 but keeps getting bad or scrambled channel. Any 1 have any ideas how to get it working with v400?
Thanks

 

are you using v4 for the box or v4 for the starview there is a difference.i have v4 for the box if you need it i can post it.

heres v4 for the box
http://www.speedyshare.com/360169961.html

 

Yea can u you send it to me please?

 

v4 for the box
http://www.speedyshare.com/360169961.html

 

All i am getting is the 4 lights flashing across the front of the box since i updated with that virsion

 

You may need to do it again as that means its a bad flas , after download complete , wait 30 secs till it re-boots !

 

that means bad flash do you have your old firmware on your copmuter.

 

yeah but that v4 for the box could be corrupt because i never used it because i don't have the box.will get another v4 nand post it.

 

Thanks Mate

 

http://www.satdownloads.co.uk/smf/index.php?action=dlattach;topic=7671.0;attach=4022

heres a link to v4 from satdownloads it should work because this is the site that provides help for starview and boxs because the admin owns the starview company

also its ziped with winrar so you will need to extract it with winrar before you can put on your box.

 

Try the V4 from Eamo's site , I think thats fine

 

i think th v4 on eamos site is for starviews not the box