still having probems

hi i have managed to download gtm loader to my starview box but i still cant send anything else to it i dont no if the gtm loader is all i need t o send to the box to stop loosing channels i have downloaded the software but cant seem to send it i downloaded unzipping tools but dont no what to do any help would be greatfull i do have a null modem cable

 

Are you following this guide?

You will need to know if you have a clone or genuine

Please click the SV EV Info link at the end of my post to compare clone V genuine boxes.

You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos Library.

You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.
You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder.


Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.

 

thanks scouser i think iam ok then as i did the gt loader and it downloaded to my starview have been running now for a week and not turned off yet so fingers crossed thanks again scouser

 

So you have updated it with the proper AU firmware then?

 

yes i think so i took it from one of the threads and downloaded the gtm loader and sent it to my box it says 100% completed so i think it sounds good

 

Well it must be if you dont have to update the codes as you know there have been quite a few changes, so congrats

 

thanks scouser