Hi all , I have used img burn in the past to back up a friends games ...all of them worked perfectly now i have my own 3 day old xbox elite and i am burning the games from .dvd files as i was before Nothing has chnaged only this time when i burn i get problems .... Firstly when imgburn completes i get that nice music and the disc opens in media player to verify , i get the message "Put the disc into a xbox 360 console etc..." So i asume its burnt correctly . Alltho when i put it into my 360 (Wich btw has been modded , im not sure what firmware it has on it but it was done yesterday so im assuming its a new firmware ?) Now all i get when i put in my backup is reading.... then Mixed Media disc... I took the xbox to a friends so he could try his backup and it worked perfectly Is there something im doing wrong in imgBurn ? that would make it verify the disc but then not load in the 360 Other info : Ive tried burning at 2.4 and 4 x ive tried it 3 times im not using verbatim discs but i did do 6 other backups on these discs for the above mentioned friend wich all worked the dics i use are ....DVD+R DL (Disc ID: RITEK-D01-01) i set the layer break to : 1913760 Any one please!? im making more coasters than ikea here
Heres the log from my last burn I 20:32:56 ImgBurn Version 2.4.2.0 started! I 20:32:56 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 20:32:56 Total Physical Memory: 3,144,024 KB - Available: 1,719,080 KB I 20:32:56 Initialising SPTI... I 20:32:56 Searching for SCSI / ATAPI devices... I 20:32:56 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 20:35:00 Operation Started! I 20:35:00 Source File: D:\Newsbin Download\Race Pro PAL XBOX360 SWAG (Diff Group)[nzbmatrix.com]-2\sw-racepro.dvd I 20:35:00 Source File Sectors: 3,825,924 (MODE1/2048) I 20:35:00 Source File Size: 7,835,492,352 bytes I 20:35:00 Source File Volume Identifier: XGD2DVD_NTSC I 20:35:00 Source File Volume Set Identifier: 34672923 I 20:35:00 Source File Implementation Identifier: Sonic Scenarist 3.1 I 20:35:00 Source File File System(s): ISO9660, UDF (1.02) I 20:35:00 Destination Device: [1:0:0] Optiarc BD ROM BC-5500A 1.86 (F (ATA) I 20:35:00 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 20:35:00 Destination Media Sectors: 4,173,824 I 20:35:00 Write Mode: DVD I 20:35:00 Write Type: DAO I 20:35:00 Write Speed: 4x I 20:35:00 Link Size: Auto I 20:35:00 Test Mode: No I 20:35:00 OPC: No I 20:35:00 BURN-Proof: Enabled I 20:35:00 Book Type Setting: N/A I 20:35:00 Optimal L0 Data Zone Capacity: 1,913,760 I 20:35:00 Optimal L0 Data Zone Method: Copied From Original Disc I 20:35:27 Filling Buffer... (40 MB) I 20:35:28 Writing LeadIn... I 20:35:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 20:35:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 20:35:29 Writing Layer 0... (LBA: 0 - 1913759) I 20:54:48 Writing Layer 1... (LBA: 1913760 - 3825923) I 21:14:41 Synchronising Cache... I 21:14:43 Closing Track... I 21:15:13 Finalising Disc... I 21:16:18 Exporting Graph Data... I 21:16:18 Graph Data File: C:\Users\Betts\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_BD_ROM_BC-5500A_1.86_17-APRIL-2009_20-35_RITEK-D01-01_4x.ibg I 21:16:18 Export Successfully Completed! I 21:16:18 Operation Successfully Completed! - Duration: 00:41:13 I 21:16:18 Average Write Rate: 3,254 KB/s (2.3x) - Maximum Write Rate: 5,330 KB/s (3.8x)
I was about to ask if your box was modded, but I see you said it is, do you know the firmware that's on it. Also have you tried the backups on your friends Xbox?
Ok , Just tried the games i did at friends , same message ...Mixed Media disc . I cant see what ive done wrong here im doing everything the same!! Im not sure on the firmware thats installed
Update - Fixed it ! it was an issue with img burn i completly removed it and then reinstalled the newest version and it worked fine Thanks lawmancop for your reply
